Cobra fog lights on GT

badstang123

New Member

Jan 17, 2006

397

0

0

Santa Clarita, CA

May 18, 2006

#1

• May 18, 2006

• #1

I have a GT and switched the front bumper for a cobra one. Since the GT fog lights obviously don't fit, I ordered cobra foglights and brackets. They should be arriving from UPS today but when I pulled the old fog lights out, the brackets mounting holes look different from the pictures of the cobra brackets and lights that I ordered. Should the cobra brackets bolt right up or am I going to need to drill new holes to mount them too? Thanks.
- Justin

 

badstang123

New Member

Jan 17, 2006

397

0

0

Santa Clarita, CA

May 18, 2006

#2

• May 18, 2006

• #2

Don't worry about it. They're in.

 

SeventyMach1

Keep it lubed .... keep it straight .... and keep

Mar 30, 2005

1,940

3

36

North Carolina

May 18, 2006

#3

• May 18, 2006

• #3

So what exactly had to be done? I'm doing this soon myself .....

 

Guero

Active Member

Oct 11, 2005

2,148

0

47

May 18, 2006

#4

• May 18, 2006

• #4

nothing, well on mine. its just different holes' i think since i never had foglights to begin with. it was super easy, except for me since the passanger side was bent from the accident. but i just out a couple of washer in the hole to line it up.

 

badstang123

New Member

Jan 17, 2006

397

0

0

Santa Clarita, CA

May 19, 2006

#5

• May 19, 2006

• #5

Putting them on I was only able to get one of the bolts on. The other holes just didn't line up. The one bolt was plenty to secure it though, since they have metal that wraps around the frame closely. I might go back in there and drill another hole so I have two but it seems fine just with one.

 

Blackened302

Active Member

Jul 21, 2005

1,439

0

36

South TX

May 19, 2006

#6

• May 19, 2006

• #6

i used those metal thingies that hug the metal and have a threaded area for a second bolt to go in.