cobra intake help

[legalize420]

what is the crankcase. i am swaping to the cobra intake and i need the pcv, hoses, and tee that go from the gromet up to the upper. im taking it in to do the swap soon but i wanted to get the parts so it wont be in long. thanks

 

[sociopath5.0]

The crankcase refers to the areas inside the engine except the combustion chambers. These areas are pressurized and the PCV valve allows the pressure to be equalized, preventing blowby. Blowby is small particles of oil in the air which can contaminate the intake charge if pressure is not vented properly.

 

[legalize420]

The crankcase refers to the areas inside the engine except the combustion chambers. These areas are pressurized and the PCV valve allows the pressure to be equalized, preventing blowby. Blowby is small particles of oil in the air which can contaminate the intake charge if pressure is not vented properly.

I had sent ford an email asking about this. They responded with a part number. When I look at the description it said hose assembely crankcase v. Do you know if this is what i need?Thanks.

 

[sociopath5.0]

Yes it is. PCV stands for positive crankcase ventilation, and the hose assembly and tee allows the valve to vent both the upper and lower intake together.

 

[legalize420]

Yes it is. PCV stands for positive crankcase ventilation, and the hose assembly and tee allows the valve to vent both the upper and lower intake together.

Thanks for your help