cobra intake help

[89mustangfive0]

hi i just recently picked up a cobra intake and was wondering if you guys could help me out. i was curious about the 2 cooling lines that run to the egr spacer on the stock intake. where do they get connected on the cobra? theres a port in the front but not in the back. Help Me thanks

 

[4G-KDMP]

this should help.

http://forums.stangnet.com/showthread.php?t=718394

 

[68keyblr]

Plug the port in front on the intake, and plug the coolant lines that used to go to the stock EGR. They are not used with the Cobra intake.

 

[patrickmx2]

hi i just recently picked up a cobra intake and was wondering if you guys could help me out. i was curious about the 2 cooling lines that run to the egr spacer on the stock intake. where do they get connected on the cobra? theres a port in the front but not in the back. Help Me thanks

Sounds like you have this resolved. That port on the front,,,, FYI is VACUUM, not WATER. MANY MANY people have bent rods on #8 piston due to hooking water to that. Water gets injested and usually finds it's way to #8 piston because of the way water flows into your motor and gravity.....

 

[85ragtop]

Not a tuning problem.
Moved to tech.