Cobra intake swap

[WHITENOTCH5.0]

I am half way done with my cobra intake swap on my 1991 Notch. I noticed that the factory intake has 2 hoses for antifreeze but i dont see that on the cobra intake. how do i go about running these hoses. Also are there any other changes that need to be made on the cobra intake. any help is appreciated.

 

[9250stang]

Bolt and cooling patters are the same on the Cobra lower as on the stock lower manifold.

 

[WHITENOTCH5.0]

im talking about the 2 lines that go to the upper near the throttle body and egr spacer.

 

[1990LXDropTop]

You are referring to the coolant hoses that flow coolant through the throttle body spacer. The Cobra intake has a built-in spacer and does not need the hoses. Plug the hole in the upper-left corner of the lower intake and cut/plug the two hoses that connect to the spacer.