Cobra T45 into a 98 GT !?

I have a slightly used T45 from a 96 Cobra that I need to get into my 98 GT without swapping the tailhousings. I know that the tranny mounts on the tailhousings are different between the T45 for the Cobra and the one for the GT. Could I use the T56 crossmember from FRPP? Would this offset the mount enough to mount the Cobra T45 into my GT? I have done a few searches and haven't been able to find anything other than either swapping tailhousings, or making a custom bracket to shift the mount. I don't want to do either of these, I just want an easy bolt up job. Any help would be greatly appreciated. ( Part number: M-5059-B )

FRPP T56 Crossmember

Thanks,
DG808

BlackInk,
Thats what I thought too, that they were the same. But after i got the Cobra tranny, I did a few searches and apperantly the crossmember mounts on the sn95 bodies are different between the Cobras and non Cobras. Either that, or Ford used two different crossmembers. I don't understand why they would be different, everything else is the same. (driveshaft length, etc...) Please, correct me if I am wrong. I have looked a couple of pics of different T45s and there is a difference in where the mount is on the tailhousing. The Cobra T45s are further back than the the GT's. I havn't gotten under my GT yet to confirm ( I guess I should) BW was bought out by Tremec in 98. Im not 100% but I think I have a Tremec in my GT now. The Cobra is definitely a BW. (Tremec = marginally better internals) I just don't want to tear into a perfectly good transmission, just to change the tail housings.

Thanks again,
DG808

Edit: the first pic is Cobra T45 and the second with the blue shifter is a GT T45. The one by the fireplace is the one I have sitting in the bed of my F150.

Are the crossmembers different? Or just the the crossmember to body mounting points or both?

Thanks,
DG808

Thanks for the replys.
Yeah, I could just swap the tail housing, but like I said, I just don't want to. I have to wait a couple of weeks to swap the trannys anyway, so I figure that I have time to wait for the Brown to deliver a cobra crossmember...if it will work.

DG808