• Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-

COBRASK8 to get operated on - Heart Transplant

  • Thread starter Thread starter chepsk8
  • Start date Start date Jul 2, 2007

chepsk8

Founding Member
Jan 15, 2001
2,203
3
49
66
Easton, PA
www.chepsk8.stangnet.com
Jul 2, 2007
#1
  • Jul 2, 2007
  • #1
It's finally time, the lump is worn out. No oil pressure at idle when hot, and barely anything at higher RPM's.

I'm ordering the Motorsports 345 HP motor. Should make quite a difference! Many other track upgrades going on as well. The cobra seems to be slowly morphing into a track car.

I'll keep you posted on the details, there will be a motor-changing party for anyone here on the East Coast!
 

rbohm

Founding Member
Apr 12, 2002
6,698
550
204
67
tucson,az
Jul 2, 2007
#2
  • Jul 2, 2007
  • #2
that will make a nice package.
 
B

bnickel

Founding Member
Aug 21, 2002
5,640
3
77
57
lubbock, texas
Jul 3, 2007
#3
  • Jul 3, 2007
  • #3
hey Dan, be sure and let Pakrat know if you want to sell the old 5.0, he's been planning on building a 347 for his vert at some point in the next couple years and that would make a great platform for him to build on, plus he'd be able to keep his matching number motor as is for re-install later on down the road.
 

StangDreamin'

Founding Member
Aug 10, 2002
583
0
16
2nd Ocotillo bush east of the Colorado River; Sout
Jul 3, 2007
#4
  • Jul 3, 2007
  • #4
Hey, that's a good plan, Ben. Pak can then say he's got a former race car motor in the 'vert.

Dan, he'd probably sweeten the deal with a slightly used set of Farberware......
 

chepsk8

Founding Member
Jan 15, 2001
2,203
3
49
66
Easton, PA
www.chepsk8.stangnet.com
Jul 3, 2007
#5
  • Jul 3, 2007
  • #5
My plans were to have Deanna tear down the old motor, so she can see what goes on inside a motor. THEN Pak can have it.


I wonder how many Farberware plates a cylinder head can crush?
 

65stanger

big blue fuzzy closet monster
Founding Member
Oct 25, 2001
3,885
1
58
65
In the Deepest, Darkest, corner of THE CLOSET, whe
Jul 3, 2007
#6
  • Jul 3, 2007
  • #6
I don't know, but I SWEAR the Chinette plates, platters and plastic utensils I stock piled (for my family gathering this weekend) have been conspiring against me.......I can hear the rustle of their wrappers as the mutter to themselves in the late afternoon......................

and last Saturday night (my one night off this week....) I could swear they kept whispering, "Turn 9, That's the place, Turn 9, Turn 9, Turn 9..........."




I should be safe now though. My brother mailed me a WMD* for this weekend.
*Weapon of Mollusk Destruction.......aka clam knife
Just wait until the 20 or so lobsters find out we're not really taking them to the circus after all.
 

chepsk8

Founding Member
Jan 15, 2001
2,203
3
49
66
Easton, PA
www.chepsk8.stangnet.com
Jul 3, 2007
#7
  • Jul 3, 2007
  • #7
If I spot 'em, they'll have to deal with the Armco!
 

chepsk8

Founding Member
Jan 15, 2001
2,203
3
49
66
Easton, PA
www.chepsk8.stangnet.com
Jul 3, 2007
#8
  • Jul 3, 2007
  • #8
Send them to Pak's!
 

65stanger

big blue fuzzy closet monster
Founding Member
Oct 25, 2001
3,885
1
58
65
In the Deepest, Darkest, corner of THE CLOSET, whe
Jul 3, 2007
#9
  • Jul 3, 2007
  • #9
Ya.......riiiiiiiiiiiiiiiiiiiiiight! to both
 
B

bnickel

Founding Member
Aug 21, 2002
5,640
3
77
57
lubbock, texas
Jul 3, 2007
#10
  • Jul 3, 2007
  • #10
StangDreamin' said:
Hey, that's a good plan, Ben. Pak can then say he's got a former race car motor in the 'vert.

Dan, he'd probably sweeten the deal with a slightly used set of Farberware......
Click to expand...



Bryan.
 

rbohm

Founding Member
Apr 12, 2002
6,698
550
204
67
tucson,az
Jul 3, 2007
#11
  • Jul 3, 2007
  • #11
chepsk8 said:
If I spot 'em, they'll have to deal with the Armco!
Click to expand...

so that is how cobrask8 really got wrecked eh? trying to stick a competetor into the armco and missed
 

chepsk8

Founding Member
Jan 15, 2001
2,203
3
49
66
Easton, PA
www.chepsk8.stangnet.com
Jul 11, 2007
#12
  • Jul 11, 2007
  • #12
Here it is, the new "Heart"!!!

A crate GT-40, 345 HP, on the loading dock at work!



Yes, the Cheap one spent BIG!!!!

Motor transplant party Wed night, July 25.
 

StangDreamin'

Founding Member
Aug 10, 2002
583
0
16
2nd Ocotillo bush east of the Colorado River; Sout
Jul 12, 2007
#13
  • Jul 12, 2007
  • #13
bnickel said:
Bryan.
Click to expand...

Sorry, Bryan.

Where did I get "Ben" from?
Maybe Fritz and my kid are right about this CRS stuff, after all.....
 

StangDreamin'

Founding Member
Aug 10, 2002
583
0
16
2nd Ocotillo bush east of the Colorado River; Sout
Jul 12, 2007
#14
  • Jul 12, 2007
  • #14
An Armco?????

Give me my 12-gauge any day for a house gun. "Oscar" only carries 6 rounds; but each squeeze sends a dozen .315 cal pellets downrange. Or 68 times a combo of .20 cal and .14 cal pellets in a buffered "2x4" round; or just one .50 cal slug in a sabot.

The Armco might be fun in an open-range scenario, though.

EDIT: Oops, my bad. You meant the wall, not the "squirt-gun"! I'm bopping back and forth between here and another forum; got my "pastimes" intermingled Maybe I am losing it......

EDIT AGAIN (Just to 'jack the thread back on-topic): The new mill sounds like a lot of fun, as well. Questions: Is there going to be write-up published? If so, will it be in Hemmings or where?
 
B

bnickel

Founding Member
Aug 21, 2002
5,640
3
77
57
lubbock, texas
Jul 12, 2007
#15
  • Jul 12, 2007
  • #15
StangDreamin' said:
Sorry, Bryan.

Where did I get "Ben" from?
Maybe Fritz and my kid are right about this CRS stuff, after all.....
Click to expand...


no problem, at least you didn't call me Byron....i've never gotten used to that one. i'll answer to A-hole, butthead or whatever just not Byron...i hate that
 

chepsk8

Founding Member
Jan 15, 2001
2,203
3
49
66
Easton, PA
www.chepsk8.stangnet.com
Jul 12, 2007
#16
  • Jul 12, 2007
  • #16
Bringin' home the new "heart" tomorrow. Now to prep it for surgury. Then, there's the patient to work on!
 

65stanger

big blue fuzzy closet monster
Founding Member
Oct 25, 2001
3,885
1
58
65
In the Deepest, Darkest, corner of THE CLOSET, whe
Jul 14, 2007
#17
  • Jul 14, 2007
  • #17
HOLY MOLY Someone check the weather report for Hell The Cheap one spent money on Cobrask8!!!
 

StangDreamin'

Founding Member
Aug 10, 2002
583
0
16
2nd Ocotillo bush east of the Colorado River; Sout
Jul 14, 2007
#18
  • Jul 14, 2007
  • #18
Per intellicast.com; weather at Hades is:

Temp: -4* F
Winds: North at 55 MPH
Wind Chill ("Feels Like"): -40* F
Visibility: 10' (due to blowing snow and ice)
Forecast: Generally Clearing with normal Temps returning approximately Tuesday, 2015!
 
You must log in or register to reply here.

Similar threads

JCBeaver's 1993 GT Coyote Swap "The Never-Ending Project"
  • JCBeaver
  • Aug 13, 2019
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 8 9 10
Replies
182
Views
33K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 2, 2020
JCBeaver
R
  • Locked
SOLD 1964 Weber Carbureted 289 Hipo $10k Firm
  • Robert Campbell
  • Sep 5, 2016
  • Engine and Power Adder
Replies
1
Views
7K
Engine and Power Adder Sep 17, 2016
Robert Campbell
R
B
  • Locked
Expired 00/03 Cobra Clone Fully Built Street/track Monster Kenne Bell
  • BOSS GT
  • Aug 20, 2013
  • SN95 Mustangs For Sale (1994-04)
Replies
4
Views
12K
SN95 Mustangs For Sale (1994-04) Oct 29, 2013
BOSS GT
B
ROUSH Performance 2014 Ford Mustang lineup
  • MRaburn
  • Mar 19, 2013
  • StangNet Site News
Replies
0
Views
3K
StangNet Site News Mar 19, 2013
MRaburn
Chevy gets the new Zl1, We get this:
  • Blackstang2012
  • Nov 23, 2011
  • 2010 - 2014 Specific Tech
Replies
6
Views
2K
2010 - 2014 Specific Tech Dec 6, 2011
Bad Boss 302
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?