Engine Code 41 again

Creomod · Saturday at 1:31 PM

Mcmahst said:
What is the vacuum reading at idle? How do you know you don’t have a vacuum leak?

I don’t have a gauge on it to know to be totally honest with you I’m just assume that I don’t have one because I replaced most of the lines and ends to them.

Mcmahst · Saturday at 2:04 PM

You might be able to borrow one from a local auto parts store. I did the same thing and still had a vacuum leak so don’t count on replacing lines to solve the problem necessarily. Good luck to you.

Creomod · Saturday at 2:23 PM

Mcmahst said:
You might be able to borrow one from a local auto parts store. I did the same thing and still had a vacuum leak so don’t count on replacing lines to solve the problem necessarily. Good luck to you.

Is it easy to hook up? Where did you connect it to?

Mcmahst · Saturday at 6:19 PM

Actually, almost any vacuum line will do. I would see if you have a nipple in your vacuum tree you can use to attach the gauge. Good luck.

Engine Code 41 again

Creomod

Mcmahst

Creomod

Mcmahst

Similar threads

Privacy & Transparency

Privacy & Transparency