The last few days here in FL, we've gotten some rain. For some reason, when it rains, I get alittle water under my spark plugs/cop. I clean it out replace the plugs and usually it works again. But last night on my way home from work, it started to get stuttery, and shoddy, like I had water under the cop. Then the CEL came on, and started flashing intermittently. when I got home, (about a 45 min drive) I cleaned up the plugs( they looked fine anyways) and the cop's (took the rust color off and applied some dialetic boot grease) and put them back in. I also cleaned out the spark plug holes form any water. It ran alot better than before but was still throwing the P0302 code. It still ran shoddy, but not as bad as before. I can't figure out what cylinder 2 is, can someone post a diagram to tell me what it is? I thought it was as follows:
4 8
3 7
2 6
1 5
This is bugging me to no ends......I tried to switch out the cop, but I may have done the wrong cyliner, which proves nothing. I', at work right now (had to drive it this morning, and I won't beable to fix it until I get home tonight) Any and all help will be appreciated.
4 8
3 7
2 6
1 5
This is bugging me to no ends......I tried to switch out the cop, but I may have done the wrong cyliner, which proves nothing. I', at work right now (had to drive it this morning, and I won't beable to fix it until I get home tonight) Any and all help will be appreciated.