• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Codes 68 and 85???

  • Thread starter Thread starter stang8urimport
  • Start date Start date Dec 18, 2005

stang8urimport

Autozone Junkie
Founding Member
Jun 21, 2002
1,499
12
59
Daytona Beach, FL
Dec 18, 2005
#1
  • Dec 18, 2005
  • #1
Ok... I dunno why it's coming up code 68, cause it's not used in the 5.0 Mustang... But 85.. These were pulled in KOEO. Any help with the Purge solenoid failure? Pulled the codes because of idle surging is getting worse.

Nick
 

stang8urimport

Autozone Junkie
Founding Member
Jun 21, 2002
1,499
12
59
Daytona Beach, FL
Dec 18, 2005
#2
  • Dec 18, 2005
  • #2
nevermind. I'm a dumbass and forgot to plug in the purge solenoid when I did the GT-40 intake. I did the KOER test and everything came back "1 1" YAY!! Thanks for the help.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Dec 18, 2005
#3
  • Dec 18, 2005
  • #3
Glad SN could help. Kind of like talkin to a shrink and diagnosing yourself with no input from the shrink.
 

stang8urimport

Autozone Junkie
Founding Member
Jun 21, 2002
1,499
12
59
Daytona Beach, FL
Dec 18, 2005
#4
  • Dec 18, 2005
  • #4
Hey, JT... Can you direct me on how to set base idle correctly? My car should beable to idle at the stock idle speed just fine. The KOER test showed the IAC is working just fine (idled up all by itself). Joe was saying something about the iac not doing anything if the idle isn't set below 625 with the iac unplugged.. Any ideas? I hate this surging problem with all these new parts.

Nick
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Dec 18, 2005
#5
  • Dec 18, 2005
  • #5
Like Joe mentioned, the IAC cant lower the idle, so the idle should be at 625 RPM (or near stalling, with a hot motor and no load) with no IAC input. That gives you your hot idle (no load) idle where you want it. Then the IAC adds additional air as needed for cold idle enrichment and load compensation.

Here is a decent synopsis of setting the idle for MAF (fox) cars.

Good luck Nick.
 

stang8urimport

Autozone Junkie
Founding Member
Jun 21, 2002
1,499
12
59
Daytona Beach, FL
Dec 18, 2005
#6
  • Dec 18, 2005
  • #6
Well, I tried it and we'll see how she does... I drove it around and it seems to be good. At first I pulled the throttle stop screw out all the way and never put it back in, touching the throttle lol. I could feel it in the gas pedal driving it around... it felt like there was a catch in the cable, but it was just taking up the slack haahah. I adjusted it back to 700 ish and reconnected the IAC, and had my fiance drive it around because I know how to keep it from stalling. Having her drive it took that part out of the equation... She said it was fine... and she only stalled the car once hahahah. Thanks JT. You da man!
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Dec 18, 2005
#7
  • Dec 18, 2005
  • #7
Glad you got it whipped Nick.
 
You must log in or register to reply here.

Similar threads

2
Running very very rich
  • 2esoteric
  • Oct 31, 2025
  • Fox 5.0 Mustang Tech
Replies
4
Views
469
Fox 5.0 Mustang Tech Oct 31, 2025
Noobz347
Electrical Code 29 again
  • Creomod
  • Jul 31, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
392
Fox 5.0 Mustang Tech Aug 3, 2026
Creomod
M
85 mustang 5.0 cranking in run position
  • Mamaclean
  • May 23, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
262
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 1, 2026
General karthief
P
Repeated P2004 DTC trouble code with no apparent symptoms
  • poehitman
  • Mar 11, 2026
  • SN95 V6 Mustang Tech
Replies
2
Views
310
SN95 V6 Mustang Tech Mar 12, 2026
poehitman
P
F
Help with air bag code 2293
  • Felwinters
  • Apr 23, 2026
  • 2005 - 2009 Specific Tech
Replies
0
Views
177
2005 - 2009 Specific Tech Apr 23, 2026
Felwinters
F
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?