Cold Air Intake for 94 Cobra?

[ShiftTheDrift]

I've been having a hard time finding a cold air intake explicitly for the `94 Cobra.

BBK is telling me that this........should work:
1712 - Cold Air Induction System 94-95 GT Mustang (Chrome)

Any other manufacturer suggestions? Thanks.

 

[VIPERn94Five-0]

make your own...its easier and costs like $20.....
it will look like this...but i was lazy and didnt paint it...you can paint it any color you want....

or you could make the Anthony Panessa Ram-Air setup!

sorry for the links but the pics are not so 56k friendly...
http://www.mustangmods.com/data/1712/p1010006_1.jpg
http://www.mustangmods.com/data/1712/p1010009_1.jpg


Anthony

 

[ShiftTheDrift]

 

[94TURBO5 O]

I've been having a hard time finding a cold air intake explicitly for the `94 Cobra.

BBK is telling me that this........should work:
1712 - Cold Air Induction System 94-95 GT Mustang (Chrome)

Any other manufacturer suggestions? Thanks.

It will fit, I had one before the blower.

 

[rudeone707]

whats so funny? You get lil to no gains from a cai vs a drop in filter. Its a cheap mod to just make the CAI and is not too hard on here. A couple members in this forum have real nice ones.

 

[ShiftTheDrift]

or you could make the Anthony Panessa Ram-Air setup!

sorry for the links but the pics are not so 56k friendly...
http://www.mustangmods.com/data/1712/p1010006_1.jpg
http://www.mustangmods.com/data/1712/p1010009_1.jpg


Anthony

 

[rudeone707]

i didnt see that. my bad.

 

[BnGRacing]

Densecharger! DeMolet Motorsports makes a great CAI and they sell Pro-M MAFs too. I bought a CAI, K&N filter & 75mm Pro-M meter for $255 delivered. You can't beat that.

 

[omarECD]

Can anyone confirm whether CAI's made for 94/95 GT's will fit 94/95 Cobras?

If not, what are the differences. I know the intakes are different (duh) but I assumed the air inlet tubing and everything else was the same.

Thanks

 

[LoudToy958]

The BBK unit works just fine. So does the one from Mac. I prefer the Mac one actually, but hey.

I just put one on my Cobra that came off my buddys 95 GT. He switched to a turbo setup, and no longer needed the intake.

Had no issues getting it on there. Took all of 15 minutes, cause I had to get the MAF outta threre.

 

[fordtech28]

ebay get it for a 94-95 gt its the same one there around 40-65 bucks gets the job done like the more expensive ones

 

[95WhiteVenom]

yea the bbk will work
my CAI = AFM power pipe and pro-m 80mm

 

[99FiveOh]

I'd say go for the Ebay setup, that's what I have and it's a flawless fit! My buddy has the BBK setup and his tubing looks like it is much smaller than mine, and he paid double what I paid!

 

[urban96]

gt/cobra cold air intakes are the same

 

[Pennywise2]

If you don't feel like making your own.I would get a Demolet CAI!
John is a great guy to deal with.Plus it will look awesome under the hood!

 

[scarless]

If you have a MAF bigger than 73mm or throttle body bigger than 65mm, the std 3" CAIs are too small and restrict flow. You can make them out of better stuff than PVC and black rubber fittings. You can get polished 3.5" Alum pipe and red or blue silicone turbo/SC couplers, reducers, and hump couplers on ebay for cheap. Check it out!

http://stores.ebay.com/SILICONE-COU...W_W0QQcolZ4QQdirZ1QQfsubZQ2d999QQftidZ2QQtZkm

http://stores.ebay.com/FCD-Tuning_INTERCOOLER-PIPES_W0QQcolZ4QQdirZ1QQfsubZ4QQftidZ2QQtZkm

http://stores.ebay.com/Full-Throttl...-Parts_W0QQcolZ4QQdirZ1QQfsubZ6QQftidZ2QQtZkm

 

[RFMustangGT]

I'll probly get flamed for this but C&L makes a nice kit that comes with a K&N, "heat sheild", 76mm mass air meter, and 76mm throttle body pipe. the TB pipe has a ticker spot for spray plus the bends are also a 76mm where some cut down when they bend........ even though it really doesn't make a HUGE difference.