combo hp and et guestimates please.

[50fan]

first combo is a stock shortblock,pistons notched to clear 202&1.6 valves perf .rpm.heads perf.rpm.intake xe282hr cam 1.6 rollers70mm t body 75mm maf 24lb inj.tko 5spd 4.10s with a 26in tire.

my second car is a 10.5 347 vicjr heads vic5.0 intake afm n-91 cam aod 3500 stall 4.30 gearsmanual valvebody with brake and a 26in tire.
how much power and what will they run?

 

[50fan]

ttt ?

 

[1SLO306]

This should be in TALK!!!

first car i would say about 310 and high 12's

second car dont know but about high 11's i would say

 

[50fan]

i dont post very much here sorry if its in the wrong place.

 

[1SLO306]

i dont post very much here sorry if its in the wrong place.

its fine just post there next time, there is people on here that will give u a hard time.

 

[$uperstang]

First combo: 260hp Low 13's
Second combo: 375rwhp and high 11's low 12's

 

[304billet]

Big ass cam for those tiny heads and intake. At least have those eddy's stage 3 ported to flow 300/210@ .500 lift and that intake port matched to match the power of that cam.

 

[Grn92LX]

1st combo high 11's

2nd combo high 10's

This is assumming it should hook.

 

[95conv5.0]

Big ass cam for those tiny heads and intake. At least have those eddy's stage 3 ported to flow 300/210@ .500 lift and that intake port matched to match the power of that cam.

victor jr heads tiny? victor 5.0 intake tiny? this is almost the biggest intake you can buy for a 5.0 out of the box! victor jr heads are 210cc heads? i dont know about you, but thats huge for a 347

 

[retro50]

First combo 320 h.p.--330 tq. Mid 12's @110+
2nd combo 375-- 400 h.p. 400 tq low 11's--118+

 

[50fan]

i think he was refering to the first car that just went 12.02 off the trailer no tuning,347 not done yet