combo question

I recently took the blower off my car and am gonna run it NA while I build up my 427.

Windsor jr. (iron) heads (gasket matched)
Cobra intake (mildly ported)
1.6rr
custom ground blower cam
LT headers
70mm throttle body
80mm maf


I was just wondering what kind of cam would be good for this combo NA. I was thinking about just running the blower cam but am not sure how much power I would leave on the table. I'm not too worried about the idle issues since I can tune it out for the most part with the tweecer.

thanks in advance.

to be honest, I really don't know the specs of the cam. I used to have a spec sheet...but kinda lost it. I do know that with the vortech (which didn't really kick in til around 4500 rpm) it had pretty good power going up to 4500...and I had my timing a bit on the retarded side.

I'm figuring that after I bump my timing back up that cam should perform pretty well.