Comp Intake... Too good to be true?

Strype · Jun 5, 2006

http://www.jegs.com/webapp/wcs/stor...atalogId=10002&storeId=10001&categoryId=14131

Anyone ever used this? Seems too good to be true... I'm so gonna by this so I don't have to do another total intake swap

emagdnim · Jun 5, 2006

Might work good with a ported lower? The lower intake is the restriction...

87GTSnake · Jun 5, 2006

It would probably work good in conjunction with a blower, but on a mostly stock car it would kill the low end.

Strype · Jun 5, 2006

87GTSnake said:
It would probably work good in conjunction with a blower, but on a mostly stock car it would kill the low end.

yea but I personally don't need the low end anyway, the notch won't hook as it is with 17x9's on the back and it's stock with a smog bypass/exhaust/cold air tube/70mm throttle body

DMAN302 · Jun 5, 2006

looks nice..buy it and let us know the scooooop.

Strype · Jun 5, 2006

DMAN302 said:
looks nice..buy it and let us know the scooooop.

I will... I just have to wait for some $$$ first...

How to sneak $309 outta the New House Account... hmmmm

BOWTIEKILLR · Jun 5, 2006

could it work with a gt40 lower? that might be on my list when my diytt goes underway

mob · Jun 5, 2006

Supposidly the short runners kill the low end. Never seen one on a stock daily driver though so let us know how it goes.

mattmcdan · Jun 5, 2006

I have this intake, it does affect your low end torque, but I have 4.10's that make up for it, the intake pulls hard from 2700-5500+, all in all it works well with other mods, and they do make a version for the GT40 intake.

wayyy2fassst · Jun 5, 2006

when cartech (or, whoever it was) was making those, I helped a friend replace one on the center divider in front of Madison Square Mall. It was close to 1:00 am, around 26 degrees out, and I was already sick as a dog. One of Huntsville's finest was watching us from the the old Service Merchandise parking lot, the whole time. When we tightened the last bolt, he came over to find out what we were doing. Turns out, he also owned a 5.0 and was considering one of the plastic intakes. We changed his mind when we showed him the pieces left from it.

pat

btw....it exploded from a below freezing backfire

Flavadave4 · Jun 5, 2006

but the stock lower is the weak point as is.....and for over $300 i dont think its a great deal, I would go get a typhoon before i would get one of those.

bluevenom867 · Jun 5, 2006

wayyy2fassst said:
btw....it exploded from a below freezing backfire

The plastic sounds like it was brittle

89white50 · Jun 5, 2006

http://www.jegs.com/webapp/wcs/stor...irect&categoryId=65548&parentCategoryId=10435

this one from jegs is WAY nicer...

Tonys96Cobra · Jun 5, 2006

For an additional $90 you can get a complete Cobra intake. Or get lucky and buy a complete GT40 tubular for $300 like me

90mustangGT · Jun 5, 2006

Honestly, most newer car's intakes are plastic, and they fair quite well, at least the newer one's. They are much lighter as well. I know the stock intake, and my performer are quite heavy, not as heavy as the old iron intakes from the good-ole-days, but still heavy. I wish someone would come out with a good plastic intake. It would be another 20lbs off the front of the car.

85_SS_302_Coupe · Jun 5, 2006

That intake is made from the same polymer (plastic) as Glock handguns. It's going to be strong enough to do whatever you want to do with it, but don't run nitrous or forced induction on it....one good backfire and it'll blow apart.

Strype · Jun 5, 2006

All good points... let me sell my Explorer intake on Ebay maybe I'll buy in a couple weeks She'll never see the winter or NAWS!

wayyy2fassst said:
when cartech (or, whoever it was) was making those, I helped a friend replace one on the center divider in front of Madison Square Mall. It was close to 1:00 am, around 26 degrees out, and I was already sick as a dog. One of Huntsville's finest was watching us from the the old Service Merchandise parking lot, the whole time. When we tightened the last bolt, he came over to find out what we were doing. Turns out, he also owned a 5.0 and was considering one of the plastic intakes. We changed his mind when we showed him the pieces left from it.

pat

btw....it exploded from a below freezing backfire

You're hittin too close to home... that must have been about 10 years ago before our newer mayor took over and all of the Cops drag raced with us

PS: Sorry about the Tennessee j/k in the other thread- If you broke a center divider in front of teh mall you are cool with me buddy

PsS: Glock is Teh WIN!!! I'm a huge fan and nobody start arguing with an Alabama boy with trophies to prove I know what I'm talking about. 2nd Place North Alabama 1996 BAAAAAAAAAAABY~~~

mob · Jun 5, 2006

HoodStrype said:
All good points... let me sell my Explorer intake on Ebay maybe I'll buy in a couple weeks She'll never see the winter or NAWS!

You're hittin too close to home... that must have been about 10 years ago before our newer mayor took over and all of the Cops drag raced with us

PS: Sorry about the Tennessee j/k in the other thread- If you broke a center divider in front of teh mall you are cool with me buddy

PsS: Glock is Teh WIN!!! I'm a huge fan and nobody start arguing with an Alabama boy with trophies to prove I know what I'm talking about. 2nd Place North Alabama 1996 BAAAAAAAAAAABY~~~

Ill buy your explorer intake, send me a pm with a price.

vristang · Jun 6, 2006

If you don't want to grenade your intake, then tune the motor properly.
At below freezing temps, I get brittle.

I am using a Comp Cams upper on a Lightning lower. On the 408w it is a great combo. Adding boost would blow out all the joints and fitting connections. The intake should have been made about twice as thick with better stiffening if it were to be used with boost.

When I used this upper on the stock 302 with a Cobra lower the bottom end torque was pitiful. I was using 3.27 gears and the sound system adds a couple hundred lbs. Using bigger gears and keeping the weight down will help.

In all I love the intake. The valve covers are much easier to get to. In general it is much easier to work on. I can pull everything from the TB to lower intake in one piece.

my thoghts
jason

Comp Intake... Too good to be true?

Strype

Cuthbert catcher

emagdnim

Active Member

87GTSnake

Member

Strype

Cuthbert catcher

DMAN302

My mom says thanks for the pearl necklace.

Strype

Cuthbert catcher

BOWTIEKILLR

New Member

mob

the guy who hits on his mom

mattmcdan

Member

wayyy2fassst

Flavadave4

Active Member

bluevenom867

I will have images of molesting stuffed animals in

89white50

Member

Tonys96Cobra

professional deer "mounter"

90mustangGT

I felt sorry for girls because

85_SS_302_Coupe

it sucks (I know) to be on the receiving end

Strype

Cuthbert catcher

mob

the guy who hits on his mom

vristang

Similar threads

Comp Intake... Too good to be true?

Cuthbert catcher

Active Member

Member

Cuthbert catcher

My mom says thanks for the pearl necklace.

Cuthbert catcher

New Member

the guy who hits on his mom

Member

Active Member

I will have images of molesting stuffed animals in

Member

professional deer "mounter"

I felt sorry for girls because

it sucks (I know) to be on the receiving end

Cuthbert catcher

the guy who hits on his mom

Similar threads

Privacy & Transparency

Privacy & Transparency