• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Compare front drop of Bullit Suspension kit to Ford C Springs.

  • Thread starter Thread starter 2002GreyGT
  • Start date Start date Jun 30, 2006
2

2002GreyGT

Member
Jun 10, 2003
481
0
16
Raleigh, NC
Jun 30, 2006
#1
  • Jun 30, 2006
  • #1
So heres the deal. I put on a Bullitt suspension kit a few months ago, and it rides great but I don't like the stance it has with my car. My rear sits about 1 inch lower then my front. Probably due to all the extra weight I have in the rear.

However, I am looking to find a set of front springs that might help even out the stance without hurting the ride / performance.

I have done a lot of reading but could not find many measurements on hieght.

So would me putting in Front C-Spings help me drop the front a little when comapred to the Bullitt suspension springs.

From what I read on Ford Racing parts site, the Bullitt kits drops my car 3/4 and the C springs drop 1 1/8. I know that is only 1/2inch give or take a little, but are those number accurate to what it really does?

My car currently sits Front 28 1/4 with old tires and Rear 27 1/2 with new tires. Give or take 1/8-1/4 inch for tire wear.

If you have any other suggestions fire away.

Thanks

~K
 

stangGT97

New Member
Dec 22, 2004
1,299
1
0
Boston area, MA
Jun 30, 2006
#2
  • Jun 30, 2006
  • #2
the cheapest thing to do would be to remove the front spring isolators and install a set in the rear. That should do the trick, for about 30 bux
 
2

2000GTNY

New Member
Jun 21, 2005
31
0
0
Albany, NY
Jun 30, 2006
#3
  • Jun 30, 2006
  • #3
I took my Bullitt springs off the front and put the C springs on. Its what I should have done in the first place. The C springs give a great ride for us daily drivers for an awesome price. I also left the isolators off and have NEVER had a squeak.
 
You must log in or register to reply here.

Similar threads

A
2001 Mustang GT, scorched metal smell and noise from trans/diff?
  • AndyE2255
  • Dec 1, 2025
  • SN95 4.6L Mustang Tech
Replies
4
Views
472
SN95 4.6L Mustang Tech Dec 28, 2025
gkomo
What's it Worth? 2000 GT
  • Mustang5L5
  • May 8, 2026
  • What is it Worth?!?!?
Replies
6
Views
327
What is it Worth?!?!? Jun 13, 2026
KRUISR
P
Fox 17" Deep Dish Bullitts on Rear of Fox, 275/40/17?
  • pindude80
  • May 2, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
9
Views
758
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 4, 2025
Noobz347
What's your tow rig?
  • LILCBRA
  • May 31, 2026
  • Other Auto Tech
Replies
3
Views
147
Other Auto Tech May 31, 2026
LILCBRA
6
Hey all,I’m putting together a 302 for my 1968 Mustang and wanted to post the combo + some questions to make sure I’m not missing crucial
  • 68_Disgustang
  • Feb 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
4
Views
978
1965 - 1973 Classic Mustangs -General/Talk- Jun 20, 2026
gray owl
G
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?