• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

compression test numbers

  • Thread starter Thread starter blue87lx
  • Start date Start date Jun 11, 2006
B

blue87lx

New Member
Apr 23, 2005
175
0
0
Jun 11, 2006
#1
  • Jun 11, 2006
  • #1
all 8 of my cylinders are between 170 and 180. just for haha's i put a little oil in one cylinder to see if there was much of a change and it went up to 240. what are good numbers? my motor from chp only has 6000 miles on it. i was thinking it was pulling oil threw the valve seals but after seeing that difference i dont know.
 
8

86bluecobra

Advanced Member
Dec 20, 2004
4,265
12
69
B.C. Canada
Jun 11, 2006
#2
  • Jun 11, 2006
  • #2
those are good numbers. you probably are pulling oil threw the valve seals.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jun 11, 2006
#3
  • Jun 11, 2006
  • #3
That's a decent jump after adding oil. In your new motor, do you have forged slugs and was the motor hot when you tested it?

The compression going up with a little oil suggests the rings are letting a little bit of compression by.

Good luck.
 
B

blue87lx

New Member
Apr 23, 2005
175
0
0
Jun 11, 2006
#4
  • Jun 11, 2006
  • #4
motor was cold. i was hoping i was pulling through the valve seals. im going to change them tomorow and see what happens. i have srs forged pistons. the thing that gets me is even after say 1000 miles my oil is still almost crystal clear.
 
B

blue87lx

New Member
Apr 23, 2005
175
0
0
Jun 11, 2006
#5
  • Jun 11, 2006
  • #5
1 more thing. theres no oil on my plugs. what would that suggest? and my pcv system is ok to
 
B

blue87lx

New Member
Apr 23, 2005
175
0
0
Jun 11, 2006
#6
  • Jun 11, 2006
  • #6
in my truck when that motor was shot and i put air in the cylinder to work on the heads i could hear air slipping by the rings. i just put air in the cylinders in the mustang and i could hear nothing so im really thinking its valve seals, well hoping.
 
B

blue87lx

New Member
Apr 23, 2005
175
0
0
Jun 11, 2006
#7
  • Jun 11, 2006
  • #7
another thing.. i started taking it apart to change the valve seals. had my intake sitting down and noticed a little spot or oil about the size of a dime on the ground coming from where the pcv valve connects to the upper manifold. my pcv valve rattel when i shake it. any ideas?
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jun 11, 2006
#8
  • Jun 11, 2006
  • #8
A wet vs dry compression test with forged slugs on a cold motor isnt too valid IMHO. As you know, a leakdown test would have been more revealing for what you desire.

Just because a PCV valve rattles doesnt mean it's good. There's a spring inside which needs to function (with a broken spring, it still rattles).

The PCV does evacuate some oily vapor into the intake - what you saw doesnt sound abnormal to me. A separator can help if desired.

Good luck.
 
B

blue87lx

New Member
Apr 23, 2005
175
0
0
Jun 11, 2006
#9
  • Jun 11, 2006
  • #9
leakdown test shows about 5percent on all cylinders
 
S

sliepnir16

New Member
May 13, 2006
26
0
0
Jun 11, 2006
#10
  • Jun 11, 2006
  • #10
Another thing is that you could have a leak in your radiator or other cooling spots that arn't located in the engine, even only forcing air out causing you to not be able to find it. Leak-down can't be very reliable, just by looking at how many things are getting pressurized at the time. A leak down is when you pressurize the radiator right?
 
B

blue87lx

New Member
Apr 23, 2005
175
0
0
Jun 11, 2006
#11
  • Jun 11, 2006
  • #11
you can do a leakdown test to check the cooling system for leaks but were talking about testing the engines cylinders
 
S

sliepnir16

New Member
May 13, 2006
26
0
0
Jun 11, 2006
#12
  • Jun 11, 2006
  • #12
Oh, so you're referring to the cylinder leakdown test where you pressurize the cylinders with air... I understand what you are saying now. I heard something about a test where the Radiator is drained and you pressurize the entire cooling system for drops to try to diagnose a blown head gasket, it sounded like it wouldn't work to me, I thought that might be what you are talking about.
 
You must log in or register to reply here.

Similar threads

Engine Looking for suggestions and or ideas
  • PonyGTrider
  • Aug 25, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
742
Fox 5.0 Mustang Tech Sep 7, 2026
PonyGTrider
J
'04 3.8L V6 mineral deposits and oil on #3 cylinder. Does it need a rebuild or something simpler?
  • joeybuddy96
  • Mar 18, 2026
  • SN95 V6 Mustang Tech
Replies
15
Views
719
SN95 V6 Mustang Tech Sep 29, 2026
gkomo
M
Misfire
  • Mike3
  • May 30, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
1
Views
156
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 30, 2026
Mike3
M
H
Ongoing Battle With Hydraulic Lifters
  • hailer06
  • Jun 8, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
621
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 9, 2026
Noobz347
B
Engine Another no start after washing engine bay
  • bruno
  • Apr 26, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
24
Views
1K
Fox 5.0 Mustang Tech May 7, 2026
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?