compression test numbers

blue87lx

New Member
Apr 23, 2005
175
0
0
all 8 of my cylinders are between 170 and 180. just for haha's i put a little oil in one cylinder to see if there was much of a change and it went up to 240. what are good numbers? my motor from chp only has 6000 miles on it. i was thinking it was pulling oil threw the valve seals but after seeing that difference i dont know.
 
That's a decent jump after adding oil. In your new motor, do you have forged slugs and was the motor hot when you tested it?

The compression going up with a little oil suggests the rings are letting a little bit of compression by.

Good luck.
 
motor was cold. i was hoping i was pulling through the valve seals. im going to change them tomorow and see what happens. i have srs forged pistons. the thing that gets me is even after say 1000 miles my oil is still almost crystal clear.
 
in my truck when that motor was shot and i put air in the cylinder to work on the heads i could hear air slipping by the rings. i just put air in the cylinders in the mustang and i could hear nothing so im really thinking its valve seals, well hoping.
 
another thing.. i started taking it apart to change the valve seals. had my intake sitting down and noticed a little spot or oil about the size of a dime on the ground coming from where the pcv valve connects to the upper manifold. my pcv valve rattel when i shake it. any ideas?
 
A wet vs dry compression test with forged slugs on a cold motor isnt too valid IMHO. As you know, a leakdown test would have been more revealing for what you desire.

Just because a PCV valve rattles doesnt mean it's good. There's a spring inside which needs to function (with a broken spring, it still rattles).

The PCV does evacuate some oily vapor into the intake - what you saw doesnt sound abnormal to me. A separator can help if desired.

Good luck.
 
Another thing is that you could have a leak in your radiator or other cooling spots that arn't located in the engine, even only forcing air out causing you to not be able to find it. Leak-down can't be very reliable, just by looking at how many things are getting pressurized at the time. A leak down is when you pressurize the radiator right?
 
Oh, so you're referring to the cylinder leakdown test where you pressurize the cylinders with air... I understand what you are saying now. I heard something about a test where the Radiator is drained and you pressurize the entire cooling system for drops to try to diagnose a blown head gasket, it sounded like it wouldn't work to me, I thought that might be what you are talking about.