• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Computer Question ? ?

  • Thread starter Thread starter asecretfile
  • Start date Start date Aug 22, 2007

asecretfile

New Member
Feb 11, 2007
228
0
0
Aug 22, 2007
#1
  • Aug 22, 2007
  • #1
Just finished a cam replacement on my 91 LX notch...the idle was surging pretty bad.....kept cutting off, would surge back and forth up to 2000 then cut off...adjusted the idle a bit and after spending about an hour and a half it somewhat leveled off around 900rpm. Does the computer have to relearn when a cam is replaced? If so does this usually take a while?

TIA
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Aug 22, 2007
#2
  • Aug 22, 2007
  • #2
See "Help me create the Surging Idle Checklist" at http://forums.stangnet.com/showthread.php?t=698148
for help with your idle problems. The first two posts contain all the updates to the fixes. I continue to update it as more people post fixes or ask questions.
 

asecretfile

New Member
Feb 11, 2007
228
0
0
Aug 22, 2007
#3
  • Aug 22, 2007
  • #3
jrichker said:
See "Help me create the Surging Idle Checklist" at http://forums.stangnet.com/showthread.php?t=698148
for help with your idle problems. The first two posts contain all the updates to the fixes. I continue to update it as more people post fixes or ask questions.
Click to expand...

Ok thanks for the info

Does the computer have to do some "learning" though?

Thanks
 

ninety15.0

New Member
Mar 10, 2004
1,336
0
0
Aug 22, 2007
#4
  • Aug 22, 2007
  • #4
Yea...the computer will have to do some relearning..but it will be based off of you short term and long term fuel trims. The computer can only compensate so much...which is why the surging idle syndrome is so common with HCI cars with injectors and MAF changes. There are only a few mechanical components that affect idle. The TB blade position, the ISC, MAF, and timing. The fuel control for idle is based off of the MAF voltages, (air volume) and Hego readings. Based on the Hego values, the computer will control idle speed by adding/removing ISC duty cycle, or by changing the timing advance. There is only so much you can do with a stock tune. Whats your combo...what injectors and MAF?
 
You must log in or register to reply here.

Similar threads

K
Resolved Need some assistance. Holley Terminator X alongside H/C/I. Very rough/inconsistent idle
  • karhoot
  • Jun 6, 2026
  • Fox 5.0 Mustang Tech
Replies
0
Views
237
Fox 5.0 Mustang Tech Jun 6, 2026
karhoot
K
S
Engine Stalls when downshifting/coasting
  • Scott_S
  • Nov 5, 2025
  • Fox 5.0 Mustang Tech
Replies
11
Views
914
Fox 5.0 Mustang Tech Nov 6, 2025
Mustang5L5
Progress Thread Giving an abandoned 88 GT project a new chance at life
  • jaketractor
  • Jan 9, 2025
  • Fox 5.0 Mustang Tech
  • 2
Replies
27
Views
2K
Fox 5.0 Mustang Tech Jul 20, 2025
Noobz347
Car idles good, then VERY SUDDENLY dies
  • Vulpes5.0
  • Jan 17, 2024
  • Fox 5.0 Mustang Tech
  • 2
Replies
25
Views
5K
Fox 5.0 Mustang Tech Feb 4, 2024
Vulpes5.0
What's your tow rig?
  • LILCBRA
  • May 31, 2026
  • Other Auto Tech
Replies
9
Views
512
Other Auto Tech Oct 23, 2026
JH96GT
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?