• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Computer Removal???????????//

  • Thread starter Thread starter Paul Perreca
  • Start date Start date Sep 24, 2005

Paul Perreca

New Member
Mar 30, 2005
1,085
0
0
Sep 24, 2005
#1
  • Sep 24, 2005
  • #1
How the **** do i get the computer out?????? LOL there is a big ass black box (not sure hwat it is) that is int he way under the dash.. i can see the bottom half of the computer... is there an easier way to get it out? HELP lol im taking it out now to put in the A9L but it looks too difficult lol


Paul Perreca
 

Paul Perreca

New Member
Mar 30, 2005
1,085
0
0
Sep 24, 2005
#2
  • Sep 24, 2005
  • #2
yo do i have to take my mother faucking dash out to get it ou?? cuz if thats the case - i aint doing it... i'll pay someone else to do it... this ****in sucks, it was supposed to be a calm saturday where i did this... god damnit
Paul Perreca
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Sep 24, 2005
#3
  • Sep 24, 2005
  • #3
Remove the passenger side kick panel. Then loosen the 10 MM bolt from the center of the big connector. When the bolt spins free, pull down on the connector assembly. Remove the 10/32 screw from the lower Rh side of the computer mount strap and pull the computer out.
 

88 Fox GT

Active Member
Nov 18, 2002
1,674
0
36
Iowa
Sep 24, 2005
#4
  • Sep 24, 2005
  • #4
It's kinda tight up in there, just follow jrichker's instructions and you should be able to get it out. Good luck.
 

Paul Perreca

New Member
Mar 30, 2005
1,085
0
0
Sep 24, 2005
#5
  • Sep 24, 2005
  • #5
Got the computer out and ordered the new one... Pickin it up in half hour for 95 bucks. I am sooo confused w/ this conversion part though.... I am buying that conversion harness from jegs, and it says there is no splicing needed, it just plugs in, how the hell does this work????? lol paul perreca
 

Paul Perreca

New Member
Mar 30, 2005
1,085
0
0
Sep 24, 2005
#6
  • Sep 24, 2005
  • #6
do i still need to use those pins n stuff, i dont understand that ****
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Sep 24, 2005
#7
  • Sep 24, 2005
  • #7
What conversion harness are you using? Do you have a picture?

All the ones I have seen require you to crimp the pins on the wires and insert them in the proper place in the computer connector.
 

Paul Perreca

New Member
Mar 30, 2005
1,085
0
0
Sep 24, 2005
#8
  • Sep 24, 2005
  • #8
i don thave a pic, but its in the jegs magazine, hang on i ll write exactly what it says verbatim...

MAF CONVERSION WIRING HARNESS

"Convert your speed density system to mass air with this wiring harness. Just connect this harness to your new MAF sensor (not included) and simply plug into your existing speed density wiring harness that connects to the mass air ECM (not included). No Cutting Wires."
$79.99

Paul Perreca
 
You must log in or register to reply here.

Similar threads

T
Electrical Brown Connector #31
  • ta66
  • Jul 26, 2026
  • Fox 5.0 Mustang Tech
Replies
2
Views
215
Fox 5.0 Mustang Tech Jul 30, 2026
ta66
T
Resolved 93 Mustang 5.0 - Cranks but does not start
  • dan50
  • Jul 18, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
475
Fox 5.0 Mustang Tech Jul 18, 2026
dan50
89 LX Electrical Troubles
  • fun331
  • Oct 25, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
5
Views
457
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 27, 2025
fun331
Removing speedo cable from the VSS
  • 91AOD5.0LX
  • Mar 25, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
27
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 25, 2026
91AOD5.0LX
S
Computer repair advise
  • sammie9271
  • Jul 28, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
18
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 2, 2025
Parauno
P
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?