Convertible Subframe Connectors...looking For Pics

B

BerBer5985

New Member

Sep 13, 2013

20

0

2

Sep 24, 2013

#1

• Sep 24, 2013

• #1

Hey Guys, I just purchased a 93 GT Convertible and I bought MM Full Length Subframe Connectors which I'm waiting to arrive and then I'm going to weld them in, but I was curious if anyone had any pictures of how they cut and welded the factory connectors on the convertible. I know they have to be trimmed back and then rewelded but I always like to get an idea before I start. pictures speak a thousand words. Thanks!

 

mikestang63

SN Certified Technician

Aug 27, 2012

11,606

8,859

214

In the garage

Sep 24, 2013

#2

• Sep 24, 2013

• #2

I'll try and get you pics of mine tonight. They make a world of difference.

 

B

BerBer5985

New Member

Sep 13, 2013

20

0

2

Sep 24, 2013

#3

• Sep 24, 2013

• #3

I think I can handle this myself, but jacking the car up in my tiny garage without much room on the sides is always fun. I really need to move my woodworking side of the garage out to the shed, put a large garage door in instead of 2 and use the whole garage for my car.

 

mikestang63

SN Certified Technician

Aug 27, 2012

11,606

8,859

214

In the garage

Sep 24, 2013

#4

• Sep 24, 2013

• #4

BerBer5985 said:

I think I can handle this myself, but jacking the car up in my tiny garage without much room on the sides is always fun. I really need to move my woodworking side of the garage out to the shed, put a large garage door in instead of 2 and use the whole garage for my car.

Click to expand...

You have to make sure the SFC are up flush against the floorpan and that the car is at ride height and loaded. You do not want to weld these on crooked or you will jack your car and suspension.

 

Casey2552

Member

Sep 16, 2013

88

2

9

Taylor,mi

Sep 26, 2013

#5

• Sep 26, 2013

• #5

I have full length on my notch , here's a pic you can sort of see but convertible may be different

 

Attachments

• image.webp

  516.5 KB · Views: 354

Casey2552

Member

Sep 16, 2013

88

2

9

Taylor,mi

Sep 26, 2013

#6

• Sep 26, 2013

• #6

I just took these as it sits now I think mine are steeda or mm on my 91 notch hope this helps

 

Attachments

• image.webp

  360.5 KB · Views: 331
• image.webp

  571.6 KB · Views: 339
• image.webp

  381.5 KB · Views: 285

Last edited: Sep 26, 2013