Cooling System Help

Foxbody1993

New Member

Oct 16, 2006

55

0

0

Jan 28, 2007

#1

• Jan 28, 2007

• #1

replaced my water pump t-stat and checked the heater core(it is good) and now the car has been idling for about 30 mins and it wont heat up. Gets to the mark above 130 and then stops. I put a 195 degree t-stat in it. Is this a problem? Heat wont work either. Dunno If I jacked something up or not. It has all water in it right now. put some flushing stuff in it and Im going to drain it and mix the antifreeze and water for it.

 

'88Cobra

Member

Oct 21, 2004

46

0

6

Jan 28, 2007

#2

• Jan 28, 2007

• #2

Sounds like you have air in the system to me. Did you do anything to bleed the cooling system after refilling it?

 

Foxbody1993

New Member

Oct 16, 2006

55

0

0

Jan 28, 2007

#3

• Jan 28, 2007

• #3

I think I figured out the problem. I think I put the damn t-stat in backwards!! I put the bridge toward the engine rather then the radiator.

 

8

86bluecobra

Advanced Member

Dec 20, 2004

4,265

12

69

B.C. Canada

Jan 28, 2007

#4

• Jan 28, 2007

• #4

yep that could mess things up a little bit.

 

Foxbody1993

New Member

Oct 16, 2006

55

0

0

Jan 28, 2007

#5

• Jan 28, 2007

• #5

Ok so I flipped the tstat around and now the car warms up BUT the damn heat still dont work!!!!! I flushed the heater core so I know its good.

 

8

86bluecobra

Advanced Member

Dec 20, 2004

4,265

12

69

B.C. Canada

Jan 30, 2007

#6

• Jan 30, 2007

• #6

sounds like you have air in it still. Sometimes the system seems near impossible to get the air out. try pulling your coolant temp gauge and filling a little there or crank car over a bit. of course don't let it fire so pull coil wire.