9 90lxfoxbody Member Jan 11, 2006 264 0 16 Jan 23, 2006 #1 Jan 23, 2006 #1 do i need a specific length pushrod for e7te's with 1.7 rocker arms, or will ones the same length as stock suffice? to take advantage of the 1.7's what length works best on a mild application? thanks.
do i need a specific length pushrod for e7te's with 1.7 rocker arms, or will ones the same length as stock suffice? to take advantage of the 1.7's what length works best on a mild application? thanks.
8 8950HO New Member Mar 31, 2005 658 2 0 Jan 23, 2006 #2 Jan 23, 2006 #2 You won`t know for sure until you set the rockers up.The stock length might be ok OR you may need longer ones. May have to use some shims as well. Stock pushrods are 6.250".If these are too short a 6.300" length should do it.
You won`t know for sure until you set the rockers up.The stock length might be ok OR you may need longer ones. May have to use some shims as well. Stock pushrods are 6.250".If these are too short a 6.300" length should do it.
dragnazz5.0 My "0" key d0esn't w0rk, s0 I have t0 use the zer0 Nov 19, 2005 815 5 18 mooresville, nc Jan 23, 2006 #4 Jan 23, 2006 #4 stock pushrods should definetly work. they worked for me with my e7s and 1.7s
8 8950HO New Member Mar 31, 2005 658 2 0 Jan 23, 2006 #5 Jan 23, 2006 #5 dragnazz5.0 said: stock pushrods should definetly work. they worked for me with my e7s and 1.7s Click to expand... Not always.I needed longer ones for Crane Cobra 1.7`s on my E7 heads in my case.
dragnazz5.0 said: stock pushrods should definetly work. they worked for me with my e7s and 1.7s Click to expand... Not always.I needed longer ones for Crane Cobra 1.7`s on my E7 heads in my case.