• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

couple questions

  • Thread starter Thread starter boosted68stang
  • Start date Start date Feb 9, 2009

boosted68stang

New Member
Jan 25, 2009
47
0
0
massachusetts
Feb 9, 2009
#1
  • Feb 9, 2009
  • #1
I took my oil pan off today and read the crank #'s E7AE-AA... is this a H.O crank? and what runs the oil pump? theres a shaft but what runs it? and because im changing the (foxbody) oil pan to a (68) mustang oil pan do I need a new oil pickup tube? I looked online for them and cant find one. Maybe the one thats already on the motor will work with this new oil pan because the sump is in the same location.. but its all beaten up and I rather replace the whole oil pump assembly because I didnt see that shaft move after turning over the motor by hand
 
B

Brian@PAR

New Member
Sep 15, 2008
86
0
0
Phoenix AZ
Feb 9, 2009
#2
  • Feb 9, 2009
  • #2
That is crank out of a 5.0 motor. HO or non HO is no different but the 5.0 is 50oz where the 302 is 28 oz.

The oil pump is driven by the distributor. The shaft from the oil pump engages the bottom of the distributor shaft. The distributor, of course, is turned by the cam.

A fox body oil pan is a rear sump. The early mustang is a front sump so the pick ups are different. Don;t be fooled by the small front sump of the fox body pan. Thisis just there to give celareanc for the oil pump the sump is in the rear.
 

boosted68stang

New Member
Jan 25, 2009
47
0
0
massachusetts
Feb 9, 2009
#3
  • Feb 9, 2009
  • #3
thanks for the info, do they sell new pickup tubes for a early model mustang? or am i gonna have to change the oil pump?
 
You must log in or register to reply here.

Similar threads

Engine Looking for suggestions and or ideas
  • PonyGTrider
  • Aug 25, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
697
Fox 5.0 Mustang Tech Sep 7, 2026
PonyGTrider
My next project , a 428 build!
  • horse sence
  • Jul 29, 2026
  • Classic Mustang Specific Tech
  • 9 10 11
Replies
213
Views
5K
Classic Mustang Specific Tech Wednesday at 6:44 PM
DadLife0724
6
Hey all,I’m putting together a 302 for my 1968 Mustang and wanted to post the combo + some questions to make sure I’m not missing crucial
  • 68_Disgustang
  • Feb 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
5
Views
1K
1965 - 1973 Classic Mustangs -General/Talk- Oct 19, 2026
mattcrp1
M
H
Ongoing Battle With Hydraulic Lifters
  • hailer06
  • Jun 8, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
607
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 9, 2026
Noobz347
V
Engine Antifreeze in oil
  • vinzo
  • Oct 9, 2024
  • Fox 5.0 Mustang Tech
Replies
5
Views
597
Fox 5.0 Mustang Tech Oct 10, 2024
vinzo
V
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?