I have been scratching my head on this crackling speaker. I need to ask the experts!
My setup is this:
avic d1 head
focal 165kp with crossovers in front
focals in rear (not sure the model)
jl audio 300/4 amp
The problem: very loud crackling noise from driver side door speakers coming from both the tweet and woofer, happens at all audio volumes.
Troubleshooting:
Since the fronts have crossovers, I swapped the driver and passenger door crossovers.. Problem stayed with driver door.
Next moved to the amp: I moved the RCA cables coming from head to the amp from left to right. Problem stayed with the driver side door.
Next moved to wiring: I had a spare speaker wire that I just plugged into the front left output on amp to the drive side crossover input. Problem still there.
OK, so in my mind, I have eliminated the crossover, a bad front channel off the amp, and the inside speaker wire from the amp to the front crossover.
What else is there? Someone please help!
My setup is this:
avic d1 head
focal 165kp with crossovers in front
focals in rear (not sure the model)
jl audio 300/4 amp
The problem: very loud crackling noise from driver side door speakers coming from both the tweet and woofer, happens at all audio volumes.
Troubleshooting:
Since the fronts have crossovers, I swapped the driver and passenger door crossovers.. Problem stayed with driver door.
Next moved to the amp: I moved the RCA cables coming from head to the amp from left to right. Problem stayed with the driver side door.
Next moved to wiring: I had a spare speaker wire that I just plugged into the front left output on amp to the drive side crossover input. Problem still there.
OK, so in my mind, I have eliminated the crossover, a bad front channel off the amp, and the inside speaker wire from the amp to the front crossover.
What else is there? Someone please help!