crank pully ?'s

Roland69

Sergeant Tangnet
Sep 17, 2005
2,867
3
58
Port Elgin, Ontario
I picked up a underdrive crank pully for dirt cheap. If I were to install just the crank pully would I need a shorter belt or would my tensioner take up that ammount of slack. I was also thinking of replacing the HB and seal when it's apart.....would just a stock replacement HB be fine or should I get an aftermarket one.

and would just a smaller crank pully even do anything
 
The crank pulley will provide you with the biggest power savings, but you'll certainly need a shorter belt if you go that route. You need the larger water pump and alternator pulley to take up the slack otherwise. IMO, go with all three pulleys for maximum power savings and if you have any changing issues, just pick yourself up a larger alternator from an SN95. I had the Mac Pulleys on mine and the SN95 alternator as well as the Taurus Electric Fan with no charging issues what so ever. :nice:
 
I would just do a crank and water pump. The alternator pullies are almost the same size. The belt ten. would make up for slack for the stock alt. pulley...not just the crank.

I would leave your HB alone, why make more work for yourself? If your set on replacing it, just buy a replacement. No need for an aftermarket fluid style balancer. If your motor is stock OEM replacement is all you need.
 
I need a new belt so I would like to do it all at once...So would I be alright just finding a water pump pully and not worring about the alt pully. IMO I don't think the alt pully would do much except cause lower voltage charge