Dammit, I Broke My Door Lock Actuator Clip

9

92GreenGT

PEAT

Founding Member

Jul 18, 2002

2,085

1

46

Big Stone Gap, VA

Nov 19, 2004

#1

• Nov 19, 2004

• #1

Got my new door lock actuators in today. Outside putting them in and I pushed to hard on the drivers side and broke the white plastic clip that holds it up. Broke one arm off of it, I tried it and it wont hold with just one arm. I knew I was going to mess it up, damn had everything going right and just pressed a little to hard. So does anyone have any ideas on ways to fix it? Dammit

 

D

Daggar

New Member

Jul 19, 2004

3,902

5

0

Nov 19, 2004

#2

• Nov 19, 2004

• #2

Here ya go brother:

http://www.dallasmustang.com/index....Product_Code=7492&Category_Code=L_Locks_Doors

 

9

92GreenGT

PEAT

Founding Member

Jul 18, 2002

2,085

1

46

Big Stone Gap, VA

Nov 19, 2004

#3

• Nov 19, 2004

• #3

That thing cost $1? OMG isnt that a pisser, have to wait like 4 days to buy something that is a dollar.

 

9

92GreenGT

PEAT

Founding Member

Jul 18, 2002

2,085

1

46

Big Stone Gap, VA

Nov 19, 2004

#4

• Nov 19, 2004

• #4

Damn shipping on those for 2 day is $26. I'm going to go see if I can make it work another way, forget that.

Dave

 

9

92GreenGT

PEAT

Founding Member

Jul 18, 2002

2,085

1

46

Big Stone Gap, VA

Nov 19, 2004

#5

• Nov 19, 2004

• #5

I just went out and layed some super strong glue/cement type stuff on it. Going to let it dry for a few hours and try that. I will make this work.

Dave

 

D

Daggar

New Member

Jul 19, 2004

3,902

5

0

Nov 19, 2004

#6

• Nov 19, 2004

• #6

92GreenGT said:

Damn shipping on those for 2 day is $26. I'm going to go see if I can make it work another way, forget that.

Dave

Click to expand...

Damn dude... have em drop it in an envelope and stck a stamp on it. You'll get it in 3.

 

jpctln

New Member

Jun 1, 2004

198

0

0

StL, MO

Nov 19, 2004

#7

• Nov 19, 2004

• #7

I had the exact same thing happen to me. I think I tried glueing it back on but that didn't work too well, so I got some wire and wired the loose side of the actuator to the arm that was still intact, went around a few more times, and knotted it. I know it's major ghetto-rig, but it works, and keeps the actuator tight against the one arm so it won't fall out.

Edit: Actually it's not wire. It's some kind of rubber-coated string thats really strong and flexible, but I don't know what it's called

 

HISSIN50

"How long does it take to get help in here?

15 Year Member

Nov 29, 1999

31,179

34

129

Nov 19, 2004

#8

• Nov 19, 2004

• #8

i would go to the home store and get a metal U shaped bracket. bend it to fit and make a means to hold the actuator in the bracket.
also some cars came with metal brackets, not plastic. if buying one, i might opt for metal.

good luck.

 

BlackFox5.0

Founding Member

Aug 7, 2000

3,514

1

0

Massachusetts

Nov 19, 2004

#9

• Nov 19, 2004

• #9

Go to the junkyard and drill one out of door.

on my old gt i could swap the actuators in a matter of seconds. I tried to do it on my LX and broke the thing just like you did I'm just going to wait till it warms up to rivet in a new one.

 

HISSIN50

"How long does it take to get help in here?

15 Year Member

Nov 29, 1999

31,179

34

129

Nov 19, 2004

#10

• Nov 19, 2004

• #10

good idea Chris. also, if yours are like mine, you dont need to drill it out. with the actuator out of the way, there is a snap ring which holds the mount on the rivot. snap ring pliers take it right off - no drilling required.

good luck.

 

9

92GreenGT

PEAT

Founding Member

Jul 18, 2002

2,085

1

46

Big Stone Gap, VA

Nov 20, 2004

#11

• Nov 20, 2004

• #11

Yeah, I know that Ford made some that were metal and some that were plastic. Of course I would get the plastic ones. I used this stuff called BullDog Grip on it, and it seems to hold. I'm going to wrap something around it so it wont give when there is pressure put on it. If that doesnt work then I will be going getting a new one. No biggey really, just was pissed at the time. Thanks guys

Dave

 

PNY PWR

New Member

Jul 23, 2004

522

0

0

Wichita, KS

Nov 20, 2004

#12

• Nov 20, 2004

• #12

I got the kit from 50resto, it came with new ones. I remeber those being a PITA too.