Dash Blank Plate Switch

jack1.1 · Jun 7, 2009

On my 2005 I don't have the my color dash which is fine, but where the switch buttons would be for it == to the left of the center power point plug is a 3 blank switch plate.

Does this big blank oval piece of goofy plastic bother anyone else?

My point being is there a replacement switch(s) I can pop in there? Has anyone retro-fitted something from another ford product into there? I'm thinking foglight switches, or something.........

Also can a Ford Edge climate controler be swapped into the mustang in lieu of the 3 rotary switches? It looks like it would work.

thanks, just asking.

french2812 · Jun 7, 2009

I used part of mine for a trunk release switch.

#1stangFAN · Jun 7, 2009

how did you do that? that sounds like a good idea, and something to keep me occupied for the next couple days

french2812 · Jun 8, 2009

I found a how to. I will look for it and post it for you later. I'm heading out on vacation tomorrow, back Saturday.

lightblade · Jun 8, 2009

I use it for my gauges switches, one for power, one for lights. And i will be installing a 3rd switch for the linelocks when i put them on.

jack1.1 · Jun 9, 2009

How did you do it lightblade and french? Did you drill out the blank plate? Does anyone make blank buttons that fit, or look decent?

I can't believe someone has not addressed this in the aftermarket with a nitrous switch or foglights or something.........

thanks just looking for some cool mods to do. ,

Jack

lightblade · Jun 9, 2009

Yes i got black rocker switches with the little led light and i drilled a hole in the middle of the sections of the panel and installed the switches.

Steel Horse · Jun 9, 2009

lightblade said:
Yes i got black rocker switches with the little led light and i drilled a hole in the middle of the sections of the panel and installed the switches.

Pictures?

lightblade · Jun 9, 2009

Here ya go:
Oh and I also installed my raptor shift light where the 12v source is on the dash its blue too.

stanmckinney · Jun 9, 2009

What head unit is that?

lightblade · Jun 10, 2009

Pionner Premier F90BT nav/dvd/cd/sd slot/sat/bluetooth/ipod/handsfree

Steel Horse · Jun 10, 2009

Looks like a nice setup.

stanmckinney · Jun 10, 2009

I thought it might be the Pioneer. I have seen it for as little as $650 recently. Apparently it has been discontinued. There are mixed reviews about it. Some love it, some hate it.
I had thought about it. What are your experiences?

lightblade · Jun 10, 2009

F90BT is newer, i have the avic d-2 before and its dicontinued, and broke lol.

AutoXRacer · Jun 11, 2009

Is it possible to swap the TC and hazard buttons to the driver side and move the blanking plates to the passenger side? I've been wondering about that...

lightblade · Jun 11, 2009

AutoXRacer said:
Is it possible to swap the TC and hazard buttons to the driver side and move the blanking plates to the passenger side? I've been wondering about that...

Yeah theres just a plug and those switch panels just snap in and out swo yes you could physical swap them however the plug from the wiring harness probably wont reach over to there in might. If not you might have to lengthen the wires.

stanmckinney · Jun 11, 2009

The 90BT and all in the same line have been discontinued. Check Pioneer's web site and Crutchfield. I have been looking, believe me. Pioneer's site says new models coming with no specs. The $650 is for what was Pioneer's latest premier player. Crutchfield had it for that up until about a week ago and now says discontinued.
It and the whole family are the units that I have seen some very mixed reviews on. Slow boot time, poor Bluetooth, etc. That's why I was wondering what experience you had.

AutoXRacer · Jun 11, 2009

lightblade said:
Yeah theres just a plug and those switch panels just snap in and out swo yes you could physical swap them however the plug from the wiring harness probably wont reach over to there in might. If not you might have to lengthen the wires.

Thanks, I'll have to check it out when I replace my Shaker 500 head unit.

AutoXRacer · Jun 12, 2009

stanmckinney said:
The 90BT and all in the same line have been discontinued. Check Pioneer's web site and Crutchfield. I have been looking, believe me. Pioneer's site says new models coming with no specs. The $650 is for what was Pioneer's latest premier player. Crutchfield had it for that up until about a week ago and now says discontinued.
It and the whole family are the units that I have seen some very mixed reviews on. Slow boot time, poor Bluetooth, etc. That's why I was wondering what experience you had.

Talking about head units... What do you guys think about Eclipse...? There is a 6620 model that sounds pretty awesome for the price. Would 15W RMS and 50W Max be OK to drive the factory speakers? Or does the Shaker 500 head unit push more?

cycosarge · Jun 12, 2009

The Shaker 500 unit pushes 500 W. 125W Peak per channel. I think 60W RMS per channel

Dash Blank Plate Switch

jack1.1

Member

french2812

New Member

#1stangFAN

New Member

french2812

New Member

lightblade

Member

jack1.1

Member

lightblade

Member

Steel Horse

Member

lightblade

Member

stanmckinney

lightblade

Member

Steel Horse

Member

stanmckinney

lightblade

Member

AutoXRacer

Member

lightblade

Member

stanmckinney

AutoXRacer

Member

AutoXRacer

Member

cycosarge

New Member

Similar threads

Dash Blank Plate Switch

Member

New Member

New Member

New Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency