Decal Help

MASHBY

New Member

Feb 24, 2006

17

0

0

Calgary,AB

May 15, 2006

#1

• May 15, 2006

• #1

Ok Mustang Guru's
I need some advise I brought rear bumper decals and Side decals.I have done the bumber decals and they went ok using the washing up liquid method.However I do find the side ones a bit more intermerdating due to there size.Does anyone have a any helpful hints they could pass on to a mustang newb.
Cheers

Similar to the ones Im trying to put on.

 

Attachments

• DS-MD-BigStripes2Style.webp

  13.8 KB · Views: 112

four six

Member

Jan 19, 2006

506

2

18

Hobart, IN

May 15, 2006

#2

• May 15, 2006

• #2

Water, water, and more water

 

Z28 KILR

Founding Member

Aug 4, 2001

386

0

0

Columbus, OH

May 16, 2006

#3

• May 16, 2006

• #3

Get an empty squirt bottle with dish soap and water and spray like crazy. The more water and soap you use the better the letters with more around and seal once you get them where they need to go. I got the soap and water decals so cheap before but now all I can find are the stickers. Where do you find the soap and water decals?

 

B

bakos24

I find there is nothing better than a tasty wiener

Nov 29, 1999

4,461

87

134

NE, OH

May 16, 2006

#4

• May 16, 2006

• #4

Soap and water and make sure you have one or two people to help you out.

 

rebelleader

New Member

Mar 18, 2003

185

0

0

Homer Glen, Il

May 16, 2006

#5

• May 16, 2006

• #5

Z28 KILR said:

Get an empty squirt bottle with dish soap and water and spray like crazy.

Click to expand...

I wouldn't use dishsoap. Use some automotive soap & water, or rubbing alcohol and water.

 

MASHBY

New Member

Feb 24, 2006

17

0

0

Calgary,AB

May 16, 2006

#6

• May 16, 2006

• #6

Thx Guys.

 

xseler8

Member

May 4, 2004

619

0

17

Montgomery County,Pa.

May 16, 2006

#7

• May 16, 2006

• #7

1 tablespoon Dawn-1 gal water. I'm pretty good with decals. HOWEVER, I ruined the side decal 2x because- I did it with some wind(picked up dirt). And too much sun present. Also, laying on the ground trying to get them parallel was rough.Take your time..make sure the weather conditions are correct.(temp & no wind)I like to use a small rubbber sqeege instead of the little rubber scrapper.Good luck..show us the finished work.
Decal installation instructions are on www.graphic-express.com