• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Deep Dish owners please come in.....?

  • Thread starter Thread starter Warrior 102
  • Start date Start date May 6, 2006

Warrior 102

New Member
Jan 22, 2003
231
0
0
Macomb MI
May 6, 2006
#1
  • May 6, 2006
  • #1
I have two question:
1.Do I need wheel spacer for this of sets 17x9 of set +24mm and 17x10.5 of set+27mm.
2.Is everyone is using stock lock nuts or you get aftermarket once?
Thanks
Sash
 

Shiroelex

There's nothing worse than aut
Founding Member
Aug 23, 2001
728
1
27
Westland, MI
May 6, 2006
#2
  • May 6, 2006
  • #2
I got my DD rims, and they went straight on the car no problem. Nothing special required for my 01. However, some tire companies and exhaust companies do things a little different than the other companies, such as Nitto. Their 315s are a tad bit skinnier than, say, a BF Goodrich 315. With that in mind, there might be a combination out there that would have a 315 rubbing a tailpipe, but I haven't heard of it yet. I had a set of 335/35/17s for a while, and they went on with no problem, but were a bit too close to my quad shocks for my liking, so I flipped the quads over, and that solved that. In regards to spacers, if you end up with the size rims you posted, put 275/40/17s up front, and 315/35/17s in rear, and it will look sweet. The tires stick out just far enough to line up with the fenders perfect on my car. Not knowing what year your car is, I can't say for sure what it will look like, but if it's a 99-04, it will definitely be good.

Another SE Michigan stangnetter. You're the third this week I've seen!
 

Mach1Run

New Member
Jun 25, 2004
333
2
0
Wylie, Texas
May 6, 2006
#3
  • May 6, 2006
  • #3
no problem for me and i did not have to mess with the quads.
 

Warrior 102

New Member
Jan 22, 2003
231
0
0
Macomb MI
May 6, 2006
#4
  • May 6, 2006
  • #4
Shiroelex said:
I got my DD rims, and they went straight on the car no problem. Nothing special required for my 01. However, some tire companies and exhaust companies do things a little different than the other companies, such as Nitto. Their 315s are a tad bit skinnier than, say, a BF Goodrich 315. With that in mind, there might be a combination out there that would have a 315 rubbing a tailpipe, but I haven't heard of it yet. I had a set of 335/35/17s for a while, and they went on with no problem, but were a bit too close to my quad shocks for my liking, so I flipped the quads over, and that solved that. In regards to spacers, if you end up with the size rims you posted, put 275/40/17s up front, and 315/35/17s in rear, and it will look sweet. The tires stick out just far enough to line up with the fenders perfect on my car. Not knowing what year your car is, I can't say for sure what it will look like, but if it's a 99-04, it will definitely be good.

Another SE Michigan stangnetter. You're the third this week I've seen!
Click to expand...
car is 2000 gt....
 

blackfang

Founding Member
Dec 17, 2001
1,290
1
39
Richmond, Va
May 7, 2006
#5
  • May 7, 2006
  • #5
I used the stock lugnuts and just flipped the quads around, that's it.
 
You must log in or register to reply here.

Similar threads

B
water pump installation questions
  • B0udreaux
  • Feb 5, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
38
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 28, 2026
General karthief
Tuners come on inside
  • squeak93
  • Feb 13, 2026
  • SVT Tech Forum
Replies
1
Views
240
SVT Tech Forum Feb 20, 2026
squeak93
A
2001 Mustang GT, scorched metal smell and noise from trans/diff?
  • AndyE2255
  • Dec 1, 2025
  • SN95 4.6L Mustang Tech
Replies
4
Views
433
SN95 4.6L Mustang Tech Dec 28, 2025
gkomo
1
Engine Motor swap from a 2003 Explorer
  • 1996mustang new
  • Oct 9, 2025
  • SN95 4.6L Mustang Tech
Replies
7
Views
555
SN95 4.6L Mustang Tech Oct 16, 2025
squeak93
Drivetrain 83’ Glx convertible C5 Trans help!
  • JacksonJared2113
  • Dec 25, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
372
Fox 5.0 Mustang Tech Dec 26, 2025
JacksonJared2113
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?