Desktop Dyno users...In here!

[mustangfreak_2001]

Hey, I was toying around with this thing and was looking at Dart's specs on heads and a 351 block and with some boost I came up with this. Could you look at this and tell me what I could do better? I know I didnt do it 100% correct and I really dont know how to use it.

http://webpages.charter.net/taurusluver/corey351a.dyn

I like the #'s though

 

[mustangfreak_2001]

heres a screen shot

 

[88POSLX]

Well, here's an example of what changes will do...

In the first screen shot (ss), it's a 351 (not stroked like yours), with the same turbo setup. It's running the Edelbrock 6089 heads and F-cam.

The second ss is the same setup, only a wilder cam profile (comp cams).

The third ss is the same cam, only with Trickflow R heads.


The hardest part of dyno2000 is inputting flow numbers for heads and inputting cam timing numbers for cam profiles.

 

[2MuchPSIForU]

nice setups, but they make their power WAY too late... 5500- 8000 ?

I doubt your run of the mill 351 will sping that high but it's just for f@cking around on i guess.

 

[mustangfreak_2001]

waaaaayy to high of an RPM for my tastes. Id like to make my power around 4-5.5K

 

[88POSLX]

Well, once you start making 900hp, you'll need a 8-9000rpm redline so you can pull the 160mph quarters...