Did the upr o/r x install

Saleen311

New Member
Dec 8, 2004
67
0
0
Hampton, Va
sounds like ****. one of the ends of the pipes were bent from shipping or something else so there is a really really bad exhaust leak right before the mufflers. It sounds like open headers on the driver side. I tried to straighten out the bend as best as I could but the leak is still rediculous. Any thoughts on how to fix the leak???? or should I send it back. I really just want to fix it because it was a pain in the ass to put on and I dont want to do it all over again to send it back then reinstall. Opinions!!!
 
  • Sponsors (?)


What was different about it from this pic?

newstangandcamaropics004iy5.jpg


UPR on the left.
 

Attachments

  • newstangandcamaropics004iy5.jpg
    newstangandcamaropics004iy5.jpg
    46.8 KB · Views: 60
Saleen311 said:
uprws2.jpg


It looked as if it was dropped and that part was bent inwards so that to opening was a lot small than it should be.


Gotcha. Id take it to a shop and have them bend it back. Shouldnt be anything more than heating it up and applying some pressure. However, if you want to send it back and get a new one they should honor that and send out a new one.
 

Attachments

  • uprws2.jpg
    uprws2.jpg
    7 KB · Views: 64