• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Did your 5-lug conversion?? IN HERE PLEASE!!!

  • Thread starter Thread starter Repostyle
  • Start date Start date Jul 30, 2006

Repostyle

Member
Jun 11, 2005
538
0
16
Portland, OR
Jul 30, 2006
#1
  • Jul 30, 2006
  • #1
Okay, I have all the parts I could find but I need some part numbers and were to get the rest.

The list of parts I can't find:

1. SS Break lines that fit 94-95gt front and rear disc to fox body hard lines
2. Perportioning (sp?) valve
3. 3-2 port sn95 mc conversion
4. e-brake cables

basically the parts I have are the ranger axles, gt rear discs and calipers, gt rear disc mounting brackets for ranger axles, sn95 fronts complete setup, and I'm just going to hit the wrecking yard for the sn95 mc and booster.

as they say "It's the little things that kill you." This couldn't be more true.

I've seen some really good write-ups on "How-to" but I can't seem to find the parts I need to do the "how-to".
 

bill302

Active Member
Nov 2, 2005
2,131
1
46
alabama,gadsden
Jul 30, 2006
#2
  • Jul 30, 2006
  • #2
master cylinder and brake booster click on link below...

http://cgi.ebay.com/ebaymotors/Mast...ryZ33566QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
 

Repostyle

Member
Jun 11, 2005
538
0
16
Portland, OR
Jul 30, 2006
#3
  • Jul 30, 2006
  • #3
bill302 said:
master cylinder and brake booster click on link below...

http://cgi.ebay.com/ebaymotors/Mast...ryZ33566QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Click to expand...


Thanks, but that's not exactly one of the parts I was asking about, I can get that at the wrecking yard and save on shipping. I'm looking for the custom parts in my list 1-4 needed to do the swap.
 

TrophyHead

15 Year Member
Mar 18, 2003
1,195
11
49
PA
Jul 30, 2006
#4
  • Jul 30, 2006
  • #4
Just pick your favorite looking proportainting valve. I went with the Wilwood one from MM.

Maximum Motorsports sells the front SS brake hoses.

MM also sells the 2-3 port MC conversion.

I got the e-brake cable from Summit Racing. FMS M2809A ebrake cables for 87-92 car (2) - or 93 Cobra cables for 1993 cars (2) F3ZZ-2A635-A
FMS M2810A center ebrake cable (1)

For the rear SS lines I have no idea I just used the adapter fitting to tie into my old hard lines.

I would get a brake booster from the parts store. It is going to be a big PITA to change out 2 brake booster and install one. Your probably going to need a hammer to dent in your strut tower brace to make it fit.

Good Luck.
 

bill302

Active Member
Nov 2, 2005
2,131
1
46
alabama,gadsden
Jul 30, 2006
#5
  • Jul 30, 2006
  • #5
contact these people in the link below they can tell you and/or sell you everything you need in SS Break lines that fit 94-95gt front and rear disc to fox body hard lines.
http://www.maximummotorsports.com/
 
R

Reed

New Member
Mar 31, 2005
78
0
0
BC, Canada
Jul 30, 2006
#6
  • Jul 30, 2006
  • #6
You'll need 2 Weatherhead 7818 line adapters for the rear, if you're going from Fox lines to 94-95 GT lines. In the front you'll need a single 7828 adapter for the passenger side from Fox to 94-95 GT lines.

As for the rest, (prop valve, cables, 3-2 port conversion) you'll have to buy those, e-bay is a great place to look. I bought these http://cgi.ebay.ca/1993-Mustang-Cob...ryZ33568QQssPageNameZWD1VQQrdZ1QQcmdZViewItem
Bought my 3-2 conv from MM and the prop valve from Ford (same as Wilwood). Good luck!
 

Ozz

I think I have a problem here.
Founding Member
Jul 27, 2001
3,514
66
109
Canton, MI
Jul 30, 2006
#7
  • Jul 30, 2006
  • #7
Mustangs Unlimited sells SS brakelines for Fox bodies (direct fit for stock) that have the round heads on them and THEY WILL WORK with the SN95 calipers. I know because I had them on my stock brakes, then reused them when the new Bullitt calipers went on.

Or you can get them from MM along with everything else, as stated. You can get the SN95 e-brake cables from a donor car, too.
 

Repostyle

Member
Jun 11, 2005
538
0
16
Portland, OR
Jul 30, 2006
#8
  • Jul 30, 2006
  • #8
Alright, here's what I have from MM

Part numbers:

Brake hose kit front PN: mmbk2f
proportioning valve PN: bpv-1
proportioning valve plug PN: bpv-2
MC PN: bmc-3
3-2 conversion PN: mmbak-3



Still need to find the rear ss brake lines, will stock 87-93 lines work on 94-95 gt disc?

mansonozz said:
Mustangs Unlimited sells SS brakelines for Fox bodies (direct fit for stock) that have the round heads on them and THEY WILL WORK with the SN95 calipers. I know because I had them on my stock brakes, then reused them when the new Bullitt calipers went on.

Or you can get them from MM along with everything else, as stated. You can get the SN95 e-brake cables from a donor car, too.
Click to expand...
 

TrophyHead

15 Year Member
Mar 18, 2003
1,195
11
49
PA
Jul 30, 2006
#9
  • Jul 30, 2006
  • #9
Repostyle said:
Still need to find the rear ss brake lines, will stock 87-93 lines work on 94-95 gt disc?
Click to expand...

Nope
 
R

Reed

New Member
Mar 31, 2005
78
0
0
BC, Canada
Jul 30, 2006
#10
  • Jul 30, 2006
  • #10
Check this website out:

http://www.wilwood.com/Products/008-Components/002-SBF/index.asp

It seems to say they offer rear stainless steel brake lines for '94 - '04 Cobras. (Ford Mustang Cobra, Rear OE Replacement (1994-2004)) I would call or e-mail them however and ask if these are just OEM rubber or SS OE replacements to be sure.

Part # 220-8595

This was the closet thing I could find to someone offering rear SS lines for a Mustang. They also list components if you're up to fabricating your own rear SS lines. Good luck!
 

Repostyle

Member
Jun 11, 2005
538
0
16
Portland, OR
Jul 31, 2006
#11
  • Jul 31, 2006
  • #11
damn I hate the word "Backorder", ship date is for around 8/18. Oh well, I guess that gives me a little more time to get my gears setup. Still looking for the rear ss lines, would it just be easier to change the rearend to sn95 hard lines?
 
You must log in or register to reply here.

Similar threads

S
Brakes 80 Mustang 4.2 rear chassis brake line for 5 lug conversion!
  • StangPowerLSX510
  • Aug 6, 2026
  • Fox 5.0 Mustang Tech
Replies
2
Views
191
Fox 5.0 Mustang Tech Aug 9, 2026
limp
S
Fox Another try for the European guy to get his first Fox
  • Schargedfox
  • Aug 3, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
10
Views
399
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 4, 2026
DadLife0724
8
87 lx 4cyl to v8 project 4 lug disc conversion questions
  • 87lx428
  • Mar 24, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
636
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 25, 2026
87lx428
8
Rear Disc and Rims Offsets
  • TripleYellow
  • Nov 11, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
19
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 9, 2026
TripleYellow
A
SN95 Hydroboost in a Fox | Brake lines
  • arc_jpiv
  • Sep 4, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
462
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 14, 2026
2000xp8
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?