Did your BBK headers come like this....????

N8Miller

I need NOS....make it 2 of the big ones

Founding Member

Jul 26, 2000

2,661

0

0

Kingston, PA, USA

Mar 3, 2004

#1

• Mar 3, 2004

• #1

i just got a set of BBK 1 3/4 long tubes headers used off the stangnet classifieds (thanks, Clay, they look great). anyway, on the inside of the ports where the headers bolt to the heads, there is this like ridge of metal. i was wondering if this was normal or not. i am going to take a dremel and get that restrictive garbage out of there, but i was just wondering if this was common or not.

 

5.0fox

Member

Feb 10, 2003

410

0

17

buckley/enumclaw wa

Mar 3, 2004

#2

• Mar 3, 2004

• #2

i dont really know for sure what brand of headers i have but when i took them out they had this ridge and i ground them off

 

nitrousED

New Member

Oct 14, 2003

88

0

0

Mar 3, 2004

#3

• Mar 3, 2004

• #3

its fine to grind the weld down,just dont get to crazy.Thats what holds the flange to the tubes

 

mustangramair

Member

Feb 24, 2004

326

0

17

Iowa

Mar 3, 2004

#4

• Mar 3, 2004

• #4

I bought new ceramic coated BBK shorties and it was exactly like that.

 

IndyBlk5.0

New Member

Nov 24, 2003

1,122

1

0

New Whiteland, IN

Mar 3, 2004

#5

• Mar 3, 2004

• #5

yeah my mac headers were like that, so i did the same thing as you did, i took a dremel and flattened the ridges, made it really smooth, not sure if that really helps anything at all, might get a horse from all 8 tubes... if that... but if your bored like i was its a fun little project... got rid of those and got some bbk equal length chrome shorties, now these didnt have any ridges in them at all from the factory, very geniune part...

 

S

SilverBullit

Founding Member

Jul 8, 2001

221

0

17

Tulsa, OK

Mar 4, 2004

#6

• Mar 4, 2004

• #6

my bbk shorties came like that, and got my dremel out and grinded the excess out also. It takes awhile to do though, good luck.

 

bighoss88lx

Founding Member

Sep 6, 2002

537

0

0

San Antonio, Texas

Mar 4, 2004

#7

• Mar 4, 2004

• #7

Same as all above posters. An hour or so with a dremel or die grinder and it will be much better.

 

S

SPEED FREAK

Founding Member

Aug 7, 2000

1,448

0

0

Regina, SK.

Mar 4, 2004

#8

• Mar 4, 2004

• #8

My hookers didnt have a ridge in them.... But my macs and flow techs sure did .