• Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
  • 2005 - 2009 Specific Tech

Differential question

  • Thread starter Thread starter 05BlackOut
  • Start date Start date Apr 25, 2005
0

05BlackOut

New Member
Apr 3, 2005
1
0
0
Atlanta, GA
Apr 25, 2005
#1
  • Apr 25, 2005
  • #1
Any thoughts/opinions on the Ford traction lock differential?

I'm about to swap gears... and I've heard that Ford's LSD is weak. Am considering replacing it with a beefier LSD while I'm at it.

Has anyone replaced the traction lock with another LSD? What kind and how do you like it in comparison?
 

300bhp/ton

New Member
Apr 4, 2005
530
0
0
England
Apr 25, 2005
#2
  • Apr 25, 2005
  • #2
Honstly don't know much about the Ford diffs, but unless you looking at BIG power (500bhp and slicks) I wouldn't have thought it would be an issue.

Besides, if you leave it stock and it doesn't break it won't have cost anything.

If it does break then change it for another one, the cost of doing this is harldy likely to be much more than changing it all at once.
 
S

seanthenerd

New Member
Apr 5, 2005
21
0
0
Apr 25, 2005
#3
  • Apr 25, 2005
  • #3
I have never really investigated this swap on a car only 4x4's and when we replace a LSD on a 4x4 we put lockers in. Anyway, changing gears I can understand, you probably want better acceleration, however, the ford built 8.8 is pretty tuff even with stock internals. If you really want to replace your LSD you could go with an Eaton with either 31 or 28 splines but both are going to run about $500. I just don't see why you would want/need one if the one you have is working just fine. I would not change it unless you break it or it becomes a weak point for powerloss. otherwise, if it aint broke, dont fix it. Unless money is no option then do what you like and send pictures. Bottom line, there is probably better things you could invest your LSD money into that would have a bigger impact on drivability and performance.
 
O

Owner1

Member
Apr 1, 2005
37
0
7
Carnation, WA
Apr 25, 2005
#4
  • Apr 25, 2005
  • #4
There is nothing wrong with Ford's Traction Lok, but in my experience they don't stay tight (able to drive both rear tires under all conditions) for more than a few years. A more complete lock-up can be had by switching to an Auburn LSD, but they don't last any longer than the Traction Lok. My solution has been to rebuild my Traction Lok every few years. New friction disks only cost about $70.00, and it takes a couple hours to put them in at the most.
 
You must log in or register to reply here.

Similar threads

J
2004 Mustang 3.8L V6 vibrations above 65 MPH and differential leaks
  • joeybuddy96
  • Mar 16, 2026
  • SN95 V6 Mustang Tech
Replies
16
Views
607
SN95 V6 Mustang Tech Jul 14, 2026
joeybuddy96
J
S
Cobra 8.8 differential rebuild shop question
  • Sestemybe
  • Aug 5, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
4
Views
356
1996 - 2004 SN95 Mustang -General/Talk- Nov 15, 2025
baileygruwell
B
3
Hammer shifter problems
  • 387lx
  • Apr 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
170
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 11, 2026
General karthief
K
Resolved Need some assistance. Holley Terminator X alongside H/C/I. Very rough/inconsistent idle
  • karhoot
  • Jun 6, 2026
  • Fox 5.0 Mustang Tech
Replies
0
Views
101
Fox 5.0 Mustang Tech Jun 6, 2026
karhoot
K
3
Eight inches is enough for me...
  • 351MooseStang
  • Nov 27, 2025
  • 1974 - 1978 Mustang II Talk & Tech
Replies
5
Views
591
1974 - 1978 Mustang II Talk & Tech Mar 2, 2026
Bullitt347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
  • 2005 - 2009 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?