DISABLING SEAT BELT CHIME?

V

vitesse06

New Member

May 15, 2006

49

0

0

May 25, 2006

#1

• May 25, 2006

• #1

1. Set the parking brake
2. Put it in Park (auto) or neutral (manual)
3. Ignition off, doors closed, lights off
4. Turn the ignition switch to RUN (or ON) position (Do not start car)
5. Wait until the safety belt warning light turns off (about 1 to 2 minutes)
** The next three steps must be completed within 60 seconds or the
procedure
will have to be repeated.
6. Buckle then unbuckle the safety belt three times, ending with it
unbuckled
7. turn on the headlights, turn off the headlights
8. Buckle then unbuckle the safety belt three times, ending with it
unbuckled
** After step 8 the safety belt warning light will be turned on for three
seconds
9. Within seven seconds of the safety belt warning light turning off, buckle
then unbuckle the safety belt
** this will disable the belt minder if it is enabled.... This is also the
procedure for enabling the belt minder if it is disabled.




---do you guys know if the same sequence will work from the 99-2004 mustang to the s197?

 

N

NorthwestGT

New Member

Jan 11, 2006

177

0

0

Pasco, WA

May 25, 2006

#2

• May 25, 2006

• #2

Thanks. Good info. But, I have to ask...How did you ever figure that procedure out? Or, is it an official Ford procedure?

 

V

vitesse06

New Member

May 15, 2006

49

0

0

May 26, 2006

#3

• May 26, 2006

• #3

im a dummy the procedure is actually in the 2005-2006 manual.........the first sequence i posted only applies to 99-04's

 

bigcat

start with the upper hole, and if more traction is

May 1, 2005

3,015

1

79

7200 feet

May 26, 2006

#4

• May 26, 2006

• #4

i was just going to suggest that..... you can do only one side, or both sides.....

 

L33T

New Member

Apr 29, 2006

23

0

0

Va Beach Va

May 26, 2006

#5

• May 26, 2006

• #5

I wonder if that would work on my 02 Exploder.

 

bigcat

start with the upper hole, and if more traction is

May 1, 2005

3,015

1

79

7200 feet

May 26, 2006

#6

• May 26, 2006

• #6

for the 02, to do it temporarily, you can just push the seatbelt release button, and it thinks you clicked the seatbelt. i dont know about a permanent disable procedure

 

W

wht-v6-vert

Banned

Jul 6, 2005

39

0

0

May 26, 2006

#7

• May 26, 2006

• #7

The disable feature is always in the owner's manual.

 

G

gp001

Founding Member

Jun 30, 2001

4,401

0

66

So. Cal.

May 27, 2006

#8

• May 27, 2006

• #8

Do you guys actually drive without your belts on, or is there another reason for that you want to disable the chime?

 

W

wally10

New Member

May 30, 2006

7

0

0

Jun 1, 2006

#9

• Jun 1, 2006

• #9

I'll have to ask the same question.....why ????
If I'm wearing my belt and the passenger isn't ...then I have to pull all my savings out to replace the hood and the windshield because my passenger went flying thru the windshield and may have scuffed my hood. Don't you have a family or friends that actually care about you?? why don't you just drill a pinhole in your brakeline and see how far you can go??

 

O

OdiousBarbarian

New Member

May 2, 2006

9

0

0

New York City

Jun 1, 2006

#10

• Jun 1, 2006

• #10

i disabled my chime, but !always! wear the sealtbelt.
however, if i am driving 15 feet at 3mph, i dont want that damned chime going off. it irritates me. so its off. if you need a loud beeping to remind you to put your belt on, you have issues

 

05MGT

New Member

Dec 8, 2004

31

0

0

Jax, FL

Jun 1, 2006

#11

• Jun 1, 2006

• #11

Here's an easier procedure:

1. Grab seatbelt
2. Insert seatbelt into socket
3. Be safe

 

T

The Fang

Member

Sep 11, 2005

602

0

16

Tallahassee Fl

Jun 1, 2006

#12

• Jun 1, 2006

• #12

That chime is no NAG compared to the wifes Toyota. That nagger will make u wanna crash the bloody car.

 

N

NICE GT

New Member

May 17, 2006

1

0

0

Jun 3, 2006

#13

• Jun 3, 2006

• #13

The chime is way better than my wife nagging me to stop spinning my tires!!!