Alarms usually are wired into the ignition. My 89 GT had a Viper that also did not work. I just pulled the module out, tucked the wires out of the way, and forgot about it.
My SVO has a Clifford that actually does work, but its a PITA when it auto-arms and then goes off while I'm working on it. I just pull the fuse and its like there is no alarm at all.
Also, I didnt know there were any factory alarmsin Fox3s......were they dealer-installed?
My SVO has a Clifford that actually does work, but its a PITA when it auto-arms and then goes off while I'm working on it. I just pull the fuse and its like there is no alarm at all.
Also, I didnt know there were any factory alarmsin Fox3s......were they dealer-installed?
The module is probably just a black plastic box under the driver's side dash or kick panel that says Viper on it. Depending on how well it was installed, its probably zip-tied to something if not just hanging loose. Mine was loose, so I just unplugged it. Ideally you trace all the wires to their tie-in points, remove everything, and insulate any exposed wires.