Do ANY 17" wheels work with the 2000 R Brembo brake kit??
- Thread starter Mustang5L5
- Start date
-
Sponsors (?)
hotmustang331
Active Member
One minute you want to sell the stang...the next minute your wating an EXPENCIVE 00R brake setup??????????? Please tell me its for the 88 lol.
stangGT97
New Member
hotmustang331 said:
sounds like Ambo... one minute hes selling the stang, next minute he has a blower and an LCD TV. jeez I wish I had that money
Marks5.0!
Founding Member
hotmustang331 said:
It's for the '88. I figured the 4.6L guys would know better than the 5.0 guys.
So 98 cobra wheels will work? Are you 100% sure? Those were the wheels i wanted to run.
How about 17x9 aftermarket bullitts (choice #2)??
Skidzz
Tinkerbell
03ghoststang
Well-Known Member
the 98 cobra wheels will work. i am running Konig Villians. Steeda Ultralights will work. 03 cobras will work. bullitts will NOT work.
if you look at all the wheels what work, there is a bulge around where the calipers is(except for the 03 cobra wheels). that bulge gives the clearance for the larger Brembo caliper. the only thing that scares me about my setup is there is about 1/2" cleanrance between the wheel and the caliper.
if you look at all the wheels what work, there is a bulge around where the calipers is(except for the 03 cobra wheels). that bulge gives the clearance for the larger Brembo caliper. the only thing that scares me about my setup is there is about 1/2" cleanrance between the wheel and the caliper.
