• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Do gears make your car slower top end?

  • Thread starter Thread starter gargol139
  • Start date Start date Dec 11, 2005
Prev
  • 1
  • 2
  • 3
Next
First Prev 2 of 3 Next Last

CanadaStang

New Member
Sep 7, 2003
2,093
1
0
Mb
Dec 11, 2005
#21
  • Dec 11, 2005
  • #21
joshheat25 said:
It doesn't make any sense that you would pull slower from 110 on after the gears! Could someone clarify this because I think it pulls harder top end after the gear install.
Click to expand...

Stock gears at 110 mph you would be in 4th
With 4.10's at 110 mph you'd be in 5th
4th gear with stock gearing is lower than 5th with 4.10's , so at that speed you'd be pulling harder in 4th with the stock gears than 5th would with 4.10's
 

ocbaud

Member
May 7, 2005
239
1
18
Midwest City, Oklahoma
Dec 11, 2005
#22
  • Dec 11, 2005
  • #22
exindust said:
without a governer theoretically the mustang should pull 200mph... BUT... factoring in things such as wing resistance... weather... traction... type of road... etc... you will NEVER see anywhere near that...
Click to expand...

exactly

so get gears no matter what! no point in having a "top speed" that high if you cant use it
 

joshheat25

Member
Nov 8, 2004
871
0
16
Delaware
Dec 11, 2005
#23
  • Dec 11, 2005
  • #23
Gotcha! Thanx for clearing that up. I have an auto so it isn't as bad! It now shifts at about 110 instead of 120.
 

tomustang

Psychotic Member
Founding Member
Jun 8, 2000
3,434
2
78
McLean Hospital
Dec 12, 2005
#24
  • Dec 12, 2005
  • #24
wow alot of misinformed info in this thread
 

triggz

Founding Member
May 15, 2002
1,218
0
37
Gadsden, AL
Dec 12, 2005
#25
  • Dec 12, 2005
  • #25
Got 4.10s in my auto and I've tapped the rev limiter which is 163mph. Speedo was well pegged.. and I was door to door with a 5spd with 4.30s.

5spd 5th gear = .67
auto o/d = .70

5spd + 4.30s ~= auto+4.10s...

Gears will only make you faster all around. </thread>
 

mrvax

Stay thirsty my friends
Founding Member
Nov 29, 1999
5,225
3
79
SN Moderator: Orlando, Fl.
Dec 12, 2005
#26
  • Dec 12, 2005
  • #26
gargol139 said:
Before everyone gives me crap I did do a search about gears, I couldn't find a post about what I was looking for. I am new to the whole mustang thing and I am just trying to gain as much knowledge as possible. Anyway I just got an 01 with 35K on it. I already want to make it faster and its only been two weeks, its an auto so I was thinking about some 4.10's, I was just wondering will it make it slower up top from say like a 70 punch?
Click to expand...

No. It will be more responsive. When I had 2.73's my 5th gear was almost useless. With the 3.73's, 5th gear has some pull behind it.
 

jstreet0204

Active Member
Jun 26, 2003
939
0
36
Winston Salem, NC
Dec 12, 2005
#27
  • Dec 12, 2005
  • #27
triggz said:
Got 4.10s in my auto and I've tapped the rev limiter which is 163mph. Speedo was well pegged.. and I was door to door with a 5spd with 4.30s.
Click to expand...

I assume you were hitting the bottle when you did this. If not, allow me to be the first to call
 

mrvax

Stay thirsty my friends
Founding Member
Nov 29, 1999
5,225
3
79
SN Moderator: Orlando, Fl.
Dec 12, 2005
#28
  • Dec 12, 2005
  • #28
And I'll second the
 

tomustang

Psychotic Member
Founding Member
Jun 8, 2000
3,434
2
78
McLean Hospital
Dec 12, 2005
#29
  • Dec 12, 2005
  • #29
wtf??? i was doing 193 in my stock cobra yesturday...
 

hotmustang331

Active Member
Apr 29, 2004
2,967
3
48
Bastrop,TX
Dec 12, 2005
#30
  • Dec 12, 2005
  • #30
[QUOTE='03GTinFLA]Yeah I was cruising 90mph on the highway and some older vette pulls up beside me and starts revving. That's a no go with me 1) b/c I'm already going fast enough for me and 2) I don't have much left in 4th and then there's 5th and well, you know what 5th is like.
BTW I have 3:73's.
I would also agree with the others. Gears are worth it, IMHO. The fun is worth a loss of pull over 110mph.
Good info p.a.p.[/QUOTE]

Hmm I have 3.73s and I would have went . I have pulled mine to 127 (6300ish..inticated) and 5800 is about 115..6K is about 120. You could have revved back and slowed down to 70 and see if he followed. \
But I agree that 90 is already fast, I would like to be ending every race at that point, but it doesnt always happen.
 

hotmustang331

Active Member
Apr 29, 2004
2,967
3
48
Bastrop,TX
Dec 12, 2005
#31
  • Dec 12, 2005
  • #31
tomustang said:
wtf??? i was doing 193 in my stock cobra yesturday...
Click to expand...
Your 1978 king cobra? WOW....AWSOME!
 

tomustang

Psychotic Member
Founding Member
Jun 8, 2000
3,434
2
78
McLean Hospital
Dec 12, 2005
#32
  • Dec 12, 2005
  • #32
hotmustang331 said:
Your 1978 king cobra? WOW....AWSOME!
Click to expand...
lTS A 1952 COBRA
 
A

AntiRice98

Member
Dec 6, 2005
158
0
16
Dec 12, 2005
#33
  • Dec 12, 2005
  • #33
I have 4.10's in my 98 GT 5spd...and mine was still pulling great at 135mph...
 

40th GT

New Member
Apr 7, 2004
916
0
0
Lawrenceville, GA
Dec 12, 2005
#34
  • Dec 12, 2005
  • #34
tomustang said:
wow alot of misinformed info in this thread
Click to expand...
Then why don't you address some of the misinformed posts?
 

ponysarepretty

New Member
Jul 25, 2005
578
0
0
Dec 12, 2005
#35
  • Dec 12, 2005
  • #35
40th GT said:
Then why don't you address some of the misinformed posts?
Click to expand...

because he is scared
 

'13_ImpactBlue_GT

Angry Little Elf
Mar 30, 2005
872
2
98
Where the men are men and the sheep are nervous
Dec 12, 2005
#36
  • Dec 12, 2005
  • #36
ponysarepretty said:
because he is scared
Click to expand...

Nawwww....tom aint skeeereed, are ya Tom?
 
T

thomas91169

I'd donkey punch my sister.
Aug 19, 2005
0
0
0
Modesto, CA
Dec 12, 2005
#37
  • Dec 12, 2005
  • #37
gears should help during a freeway run also, as youre in your powerband more, especailly when going into 5th, instead of coming back down to 2500rpm, itll put you more at 3200rpm, and closer to your powerband.

i hate my 5th gear during a freeway race, the car pulls so nicely to 115ish at around 5500rpm in 4th, but shifting into 5th kills it, and takes forever to get into its powerband. ive hit 150, but it took really long, but at 150 it started to feel smoother cause the rpm's were coming into their powerband. from 115-135 it was major slow since it was only turning about 2.5-3k.

im going with 3.90s, 3.73s dont seem like enough of a difference to hassle, and 4.1s seem like too much if youre planning on doing any road trips.
 

blackfang

Founding Member
Dec 17, 2001
1,290
1
39
Richmond, Va
Dec 12, 2005
#38
  • Dec 12, 2005
  • #38
Ok since some of you are confused, or just absolutely clueless on this, I will try and help clear it up.

Yes theoretically(sp) stock gears will allow the car a higher top end. Ok why does this not happen? One the cars power, weight, distance and the kicker resistance.

Ok so how do we overcome this? Going with a steeper gear, this will allow the motor to be in its powerband faster, and be more useful in the higher gears aka 4th and 5th gear. What does this do? It allows the car to pull harder and overcome the resistance that the stock gearing could not. The stock gear kept the motor out of the powerband in 5th gear. This is why people gain top speed on a long stretch of road because the 4th and 5th gear was more usable to obtain a higher mph as it was in the powerband, and pulling more unlike the stock gears.

My old 99 cobra on the same stretch of raod with stock gears I was able to hit 150 and that was pushing it for that lenght of distance. When I added the 4.10's I burried the speedo at 160 in the same amount if not a little less in distance on the same road. The car was still pulling in 5th gear with the 4.10's unlike the 3.27's which were useless in 5th.

Hope this answered the question
 

Sid3ways S13

20+ Year Stangneter
Mar 28, 2004
60
0
6
NW Ohio (Swanton)
Dec 12, 2005
#39
  • Dec 12, 2005
  • #39
Also to combat the lack of power in 5th gear just simply add a blower. 8-10 pounds out of a KB or Vortech makes for a SEG in 5th gear if you have gears (I don't have gears so no SEG for me yet ). But you get the idea
 
B

bgbg22

New Member
Dec 5, 2005
23
0
0
Dec 12, 2005
#40
  • Dec 12, 2005
  • #40
Sid3ways S13 said:
Also to combat the lack of power in 5th gear just simply add a blower. 8-10 pounds out of a KB or Vortech makes for a SEG in 5th gear if you have gears (I don't have gears so no SEG for me yet ). But you get the idea
Click to expand...

Hey guys, lets say i dont have enough money for a blower. What other upgrade could i get that can add to the high end after i get the gears (4.10) installed. Other than an supercharger, etc. Will headers, exhaust compensate?
On a 00-02 GT. I am planning on buying a car, so i am planning on figuring out what to buy. Def getting 4.10 Gears installed first.
 
Prev
  • 1
  • 2
  • 3
Next
First Prev 2 of 3 Next Last
You must log in or register to reply here.

Similar threads

A
Discussion on mild budget build/ top end
  • Acesario
  • Feb 21, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
20
Views
722
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 23, 2026
General karthief
R
Progress Thread A small update on our first-gen Mustang project
  • Restomotive
  • Apr 24, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
0
Views
98
1965 - 1973 Classic Mustangs -General/Talk- Apr 24, 2026
Restomotive
R
S
Engine Stalls when downshifting/coasting
  • Scott_S
  • Nov 5, 2025
  • Fox 5.0 Mustang Tech
Replies
11
Views
708
Fox 5.0 Mustang Tech Nov 6, 2025
Mustang5L5
B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
176
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
Progress Thread Progress Thread- From6to8's 95 GT/Saleen Supercharged 331 install
  • from6to8
  • Mar 22, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
24
Views
910
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 6, 2026
from6to8
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?