• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Do I need to "build up" the rear end?

  • Thread starter Thread starter GTRayRay
  • Start date Start date Jan 18, 2006

GTRayRay

New Member
Oct 21, 2005
6
0
0
Green Bay, WI
Jan 18, 2006
#1
  • Jan 18, 2006
  • #1
Hi, I'm very new to all of this stuff. Bought a like new 2000 GT, 5spd, with 29k on it this past Oct.(sitting in storage now, winter sux!!) Its great, but I'm itching for more power. I think I'm going to go the s/c route. Reading alot on here, I think my best bet is the Mongoose Paxton kit from MPH. I've read the stock engine internals are good for up to 400 hp, I plan on no more than 375 hp to be safe till I have the cash to build up the 4.6.

My question is do I have to "build up" the rear end to handle the increase in power? And what exactly does that entail? Is there anything else that needs to be strengthend up to handle more power?
 

Marks5.0!

Founding Member
Jan 27, 2000
640
2
0
San Antonio, TX
Jan 18, 2006
#2
  • Jan 18, 2006
  • #2
if your gonna do any hard launches on slicks yeah id build it. been plenty of 300rwhp machs that have grenaded the stock rear on drag radials and slicks
 
R

Red2000GT

Founding Member
Sep 10, 2000
2,450
0
46
Regina,Sask.Canada
Jan 18, 2006
#3
  • Jan 18, 2006
  • #3
werd^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 

2000 blown conv

New Member
Apr 5, 2005
61
0
0
Ontario Canada
Jan 18, 2006
#4
  • Jan 18, 2006
  • #4
If your going to see any track time with sticky tires then I would. Set of axles,moser or strange 31 spline would be sufficient, eaton or another kind of posi-unit would definatley work for you. Strange has good axle/posi-unit/C-clip eliminator packages for a pretty good deal.
 

mineralgray2002

New Member
Dec 4, 2005
33
2
0
Centralia, Illinois
Jan 18, 2006
#5
  • Jan 18, 2006
  • #5
What about if its gonna be on stock size tires and no track time?
 

xseler8

Member
May 4, 2004
619
0
17
Montgomery County,Pa.
Jan 18, 2006
#6
  • Jan 18, 2006
  • #6
Leave the axles as is for now. I launch at 2000-2500 with a shift light & Nitto DR's. Get some rear U&L control arms & subframe connectors.Upgrade the axles/rear together when you have the cash or have the need.
 
You must log in or register to reply here.

Similar threads

A
Discussion on mild budget build/ top end
  • Acesario
  • Feb 21, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
20
Views
732
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 23, 2026
General karthief
Big Posi and Neg wire from Starter to Battery and Alt wires..........
  • from6to8
  • Feb 9, 2026
  • 1994 - 1995 Specific Tech
Replies
1
Views
217
1994 - 1995 Specific Tech Feb 9, 2026
AeroCoupe
A
Thinking of building a BOSS 302 bottom end and have some questions!
  • Angelq1028
  • Apr 1, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
379
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 4, 2025
TOOLOW91
H
Forced Induction On3 Turbo Kit- Parts list NEEDED - 302 Stock Motor
  • Hirothecool1
  • Feb 27, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
21
Views
1K
Fox 5.0 Mustang Tech Mar 7, 2026
slow84lx
S
Rear end
  • RileyDymond
  • Feb 22, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
13
Views
824
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 13, 2025
revhead347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?