• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-

Do progressive lowering springs hurt traction when launching?

  • Thread starter Thread starter Stangg338
  • Start date Start date Dec 17, 2021
  • Tags Tags
    2v mustang gt 4.6 lowering springs convertible lowering springs ford performance g springs stock 2001 mustang gt springs traction and lowering springs
S

Stangg338

New Member
Dec 17, 2019
23
0
1
Utah
Dec 17, 2021
#1
  • Dec 17, 2021
  • #1
So I've been on the fence on getting lowering springs for my 01 Mustang GT Vert that is still on stock springs. I've been looking at Ford Performance "G" Springs for convertibles but question for everyone. I don't do any drag racing at the track but do a lot of spirited driving and launches on the street. I'm not looking to have the fastest car in the world but I just don't want to lower my car and get worse traction than I did with stock springs. How has everyone's experience been with traction with lowering springs? I'm not looking to slam my car but rather just a 1" drop all the way around with progressive rate springs. It's my daily (all year long) so I'm not looking for drag springs. I have all new slightly stiffer shocks and struts and control arms installed.
The "G" springs rate =
Front: 500/570 lb/in.
Rear: 170/310 lb/in.

Any help would be appreciated.
 

TIGGER

Founding Member
Mar 6, 2000
877
244
104
Portland, OR
Dec 19, 2021
#2
  • Dec 19, 2021
  • #2
I have lowered 5 SN95 cars and one new edge in the last 25 years and have never noticed a difference in traction between the stock springs and the lowering springs. I used all different types springs, from eibach’s, to Ford Motorsport B’s and C’s, to most recently H&R. Most were used but some were new.

I think you will be fine with what you choose.
 
Reactions: Stangg338
S

Stangg338

New Member
Dec 17, 2019
23
0
1
Utah
Dec 19, 2021
#3
  • Dec 19, 2021
  • #3
TIGGER said:
I have lowered 5 SN95 cars and one new edge in the last 25 years and have never noticed a difference in traction between the stock springs and the lowering springs. I used all different types springs, from eibach’s, to Ford Motorsport B’s and C’s, to most recently H&R. Most were used but some were new.

I think you will be fine with what you choose.
Click to expand...
Thank you so much for this. I’ve been scratching my head for weeks trying to see if lowering springs would be ideal for me and I guess there’s only one way, and that’s to install them and test them out on the street. General idea is everybody lowers their stang so I might as well do it since that’s one of the last things to do in my suspension. Thanks again!
 

TIGGER

Founding Member
Mar 6, 2000
877
244
104
Portland, OR
Dec 20, 2021
#4
  • Dec 20, 2021
  • #4
Your welcome, In addition to the lowering springs I suggest you get some camber plates. Like springs, there are plenty of brands out there but I have always used maximum motorsports in all my cars and have been very happy with them. Also, you may want to get some offset rack bushings. That is another thing I do when I lower a car to try and minimize the bump steer. With the offset rack bushings, I have little to no bump steer on my SN95 cars. I honestly do not notice it. On my foxbody Saleen, I really noticed it when I first bought the car. It was awful. Offset rack bushings did not help much so I installed a bump steer kit and that solved it. Good luck to you.
 

7991LXnSHO

wanna catch the space herp
10 Year Member
Sep 1, 2010
7,387
2,745
194
Kearney, NE
Dec 20, 2021
#5
  • Dec 20, 2021
  • #5
Don’t lower it more than that if you want to drive it on the street. Fox and SN95 cars handle better when there is some suspension movement. I
I do not know how the G springs compare to the MM light blue springs, but I am so much happier with B springs. It took a very short time to get used to progressive springs that did not rattle my kidneys. I could have send poly spacers with the MM springs and am glad I did not. It had been a slot car on smooth roads. I do not think I have lost any grip I could measure off a track
 
Last edited: Dec 20, 2021
You must log in or register to reply here.

Similar threads

For Sale 99-04 GT 4.6 CONV COUPE COBRA SET OF 4 FRONT/REAR SPRINGS. TODS HOT RODS MOORPARK CA 93021 $225
  • Tods Hot Rods
  • Nov 20, 2024
  • Suspension Parts
Replies
1
Views
377
Suspension Parts Dec 12, 2024
caliber92
A
2001 Mustang GT, scorched metal smell and noise from trans/diff?
  • AndyE2255
  • Dec 1, 2025
  • SN95 4.6L Mustang Tech
Replies
4
Views
450
SN95 4.6L Mustang Tech Dec 28, 2025
gkomo
S
Upgrade Advice on an 89 GT Convertible NJ
  • SteakDad
  • Apr 17, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
10
Views
862
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 18, 2025
limp
Stiffer front springs writeup from the old .net site
  • LILCBRA
  • Oct 24, 2022
  • 1974 - 1978 Mustang II Talk & Tech
Replies
1
Views
1K
1974 - 1978 Mustang II Talk & Tech Oct 29, 2022
Enzio
J
Progress Thread Family member 1989 GT- Backstory and updates
  • JRC99
  • Apr 19, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
15
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 26, 2025
JRC99
J
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?