Do you guys think i'll have piston to valve clearance with this setup (351w)

[DarkoStoj]

I was just curious if those more experienced engine builders would think if I'll have a problem with this setup

351w block
flat top pistons with 4 2cc valve releifs(deck milled)
62cc world windsor sr iron heads (milled from 64cc) with 2.02/1.6 valves
10.49:1 cc with a .039 head gasket

the cam is a lunati 41008 solid flat

290/300 adv dur.
249/258 dur @.50
.54/.544 lift with 1.6 rockers
I have 1.72 rockers so my lift will be .581/.585
108LSA with a 104 ICL

 

[bluevenom867]

You might,but I dont think so.
Check anyways.

Are the relieves for a standard in-line head?

 

[DarkoStoj]

this is what the valve reliefs look like

View attachment 516993

 

[bluevenom867]

Looks like Speed-Pro's.
I dont know,it would be close.
Thous are stock replacment,you might need to do some grinding on them.

I would check the clearance,and also see if someone has a fly cutting tool you could borrow if you end up needing it.