• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Does 86 GT AOD Convertible have an Inertia Switch?

  • Thread starter Thread starter twistedwankel
  • Start date Start date Apr 18, 2010

twistedwankel

Member
Sep 7, 2006
200
0
17
Spring Hill, FL
Apr 18, 2010
#1
  • Apr 18, 2010
  • #1
Does 86 GT AOD Convertible have an Inertia Switch? ANSWER YES!!

I'm 1200 miles away from a stock 86 GT 5.0 AOD convertible my brother just bought for me and there is no owner's manual.

I checked all over this site (searched three sites) and cannot find any information specific to the Convertible - only the Coupe and Hatch. I even have awesome pix of both those car switch locations but nothing for the convertible.

My brother cannot find one in the trunk. But he just might have missed it? It isn't a problem at the moment I just want to know for my pending 1200 mile drive home next week.

My 84 LX 5.0 AOD Convertible CFI does not have one. Never did. So that leads me to believe they all don't after finding nothing.

Thanks for your indulgence.

Complements to slow84LX!!
 

MustangLX-5.0

Founding Member
Dec 2, 2000
856
7
38
Lehigh Acres Fla.
Apr 18, 2010
#2
  • Apr 18, 2010
  • #2
Odd, I have one on my 92 LX vert. Gotta remove the rearmost trim panel on the drivers side in the trunk. Is it carbed, or EFI?
 

twistedwankel

Member
Sep 7, 2006
200
0
17
Spring Hill, FL
Apr 18, 2010
#3
  • Apr 18, 2010
  • #3
MustangLX-5.0 said:
Odd, I have one on my 92 LX vert. Gotta remove the rearmost trim panel on the drivers side in the trunk. Is it carbed, or EFI?
Click to expand...

The 86 is a stock EFI = first year for that multiport unit.

Like I said maybe he missed it? At least I know for sure to look in the trunk two places when I get there.
 

tims 86

Member
Apr 19, 2009
187
0
16
pittsburgh,pa
Apr 18, 2010
#4
  • Apr 18, 2010
  • #4
i have an 86 notch and its tore down to the metal and i havent seen one, only thing im not too sure of is a molex plug to something under drivers seat.
 

twistedwankel

Member
Sep 7, 2006
200
0
17
Spring Hill, FL
Apr 18, 2010
#5
  • Apr 18, 2010
  • #5
tims 86 said:
i have an 86 notch and its tore down to the metal and i havent seen one, only thing im not too sure of is a molex plug to something under drivers seat.
Click to expand...

Yes there is the actual 'fuel pump relay' under the driver's seat for all FI models from 84 on but that is not an inertia/kill switch normally in the spare tire hole or left rear fender trunk area.

Thanks.
 

twistedwankel

Member
Sep 7, 2006
200
0
17
Spring Hill, FL
May 29, 2010
#6
  • May 29, 2010
  • #6
There is none on my 86GT convertible!!

twistedwankel said:
Yes there is the actual 'fuel pump relay' under the driver's seat for all FI models from 84 on but that is not an inertia/kill switch normally in the spare tire hole or left rear fender trunk area.

Thanks.
Click to expand...

I even found an original owner's manual that says there is supposed to be one and where it should be on the driver's side trunk hinge but there isn't one!! Just like my 84CFI. NONE.
 
S

slow84lx

clean it good before insertion
Jul 3, 2005
372
180
63
Dallas, TX
May 29, 2010
#7
  • May 29, 2010
  • #7
twistedwankel said:
I even found an original owner's manual that says there is supposed to be one and where it should be on the driver's side trunk hinge but there isn't one!! Just like my 84CFI. NONE.
Click to expand...

You are wrong unless someone has removed it and rewired around it. It is installed in the area stated but is not easy to see unless you are looking for it. I didn't think my '84 CFI coupe had one either until I had fuel pump issues recently and had to locate the inertia switch in order to diagnose the exact problem I had.....I've owned my coupe since 1985 and have replaced most of the parts on it at least once myself so I am very familiar with it.
 

twistedwankel

Member
Sep 7, 2006
200
0
17
Spring Hill, FL
May 30, 2010
#8
  • May 30, 2010
  • #8
I will admit when I'm wrong and I did finally find it!!

slow84lx said:
You are wrong unless someone has removed it and rewired around it. It is installed in the area stated but is not easy to see unless you are looking for it. I didn't think my '84 CFI coupe had one either until I had fuel pump issues recently and had to locate the inertia switch in order to diagnose the exact problem I had.....I've owned my coupe since 1985 and have replaced most of the parts on it at least once myself so I am very familiar with it.
Click to expand...

This is ALMOST embarrassing as when I stood on my head to tear apart the trunk liners there was a small hole right in front of me with a little white button!! Apologies for my lack of perseverence but it wasn't where the manual said it would be!! After thought?

THERE IS AN INERTIA switch on my 86GT Convertible!! Sorry for misleading anyone. Need new bifocals like the commercial!!
Complements to slow84LX
 
S

slow84lx

clean it good before insertion
Jul 3, 2005
372
180
63
Dallas, TX
Jun 11, 2010
#9
  • Jun 11, 2010
  • #9
I'm glad that you found it, man. That will be some important information to have some day. I hope that the drive goes well and trouble free.
 
V

v8only

Active Member
Jul 3, 2003
2,378
22
49
Jun 12, 2010
#10
  • Jun 12, 2010
  • #10
I had an 86 convertible for 13 years....

download this...it's the entire ford shop manual for electrical and vacuum specifically for your 86. It took me a tremendouse amount of time to scan this book (out of print)

http://slantnosefox.com/picturehosting/jeremy/86 electrical & vacuum troubleshooting manual.zip
 
You must log in or register to reply here.

Similar threads

What's it Worth? 2000 GT
  • Mustang5L5
  • May 8, 2026
  • What is it Worth?!?!?
Replies
6
Views
301
What is it Worth?!?!? Jun 13, 2026
KRUISR
1999 Mustang GT - No Start- Need help understanding the fuel pump circuit and how it works
  • 99gtGuy
  • Nov 4, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
521
1996 - 2004 SN95 Mustang -General/Talk- Nov 7, 2025
04newedge-
0
Z
Progress Thread zeth194 - New Guy on the Block
  • zeth194
  • Mar 19, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
10
Views
552
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 26, 2026
LILCBRA
F
Resolved Stumble issue upon acceleration (1987 GT)
  • FoxDude87
  • Sep 16, 2024
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
54
Views
3K
Fox 5.0 Mustang Tech Dec 3, 2024
FastDriver
S
Upgrade Advice on an 89 GT Convertible NJ
  • SteakDad
  • Apr 17, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
10
Views
881
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 18, 2025
limp
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?