Does anyone here have a tko-500

S

Starman

New Member

May 27, 2005

78

0

0

Oct 23, 2005

#21

• Oct 23, 2005

• #21

driveshafts are the same for fox and sn95. I have a FMS aluminum and still used a 5/8" spacer when I installed the TKO. The tranny sits that much further up towards the front of the car when using a TKO or fox style tranny/bell.

I guess if the driveshaft was made for your application then it'd be ok, like maybe one for the '94/5 cobra R.

 

jruppert

Founding Member

Oct 20, 2001

294

1

19

Michigan

Oct 23, 2005

#22

• Oct 23, 2005

• #22

I used an aluminum bellhousing from an early 80's Mustang SROD tranny. The part number will cross over to what Tremec recommends without a hefty price.

 

F

fiveohh94gt

New Member

Dec 26, 2003

277

0

0

Oct 23, 2005

#23

• Oct 23, 2005

• #23

i've never heard of a longer driveshaft that motorsport makes so that the spacer isnt needed, and you dont need a new driveshaft, just a new yolk for the tranny end of the driveshaft with the correct spline. depending on which model TK500/600 you get will determine what clutch disk you need.

 

WhiteDevil

New Member

Feb 4, 2003

2,717

0

0

San Diego

Oct 24, 2005

#24

• Oct 24, 2005

• #24

miller92063 said:

what modification needs to be made to the crossmember?

Click to expand...

Dont modify your crossmemeber just buy an Offset trans mount and it will be one million times easier. I got mine from www.bieberfever.com. I did mine about 3 months ago. Here is what i needed

Bell Housing, TKO-500, Fox Clutch Fork, Offset mount, 31 spline slip yoke, DS spacer, 3 quarts of GM Syncromesh.

 

M

miller92063

Member

Oct 12, 2005

253

0

16

Nebraska

Oct 26, 2005

#25

• Oct 26, 2005

• #25

thanks for the help!