• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Does anyone know here I can purchase a spout connector?

  • Thread starter Thread starter yellowstang1994
  • Start date Start date Dec 14, 2004

yellowstang1994

New Member
Sep 9, 2004
338
0
0
Dec 14, 2004
#1
  • Dec 14, 2004
  • #1
Is there anywhere else besides the dealer? I searched everywhere online. Also, i don't want to tie the wires together and rip the clip off etc... I jsut awnt to know where I might beable to buy the grey spout.
Thanks
 
I

Idwitheld-1`

New Member
Nov 30, 2003
335
0
0
Portland Oregon
Dec 14, 2004
#2
  • Dec 14, 2004
  • #2
I've heard of guys soldering in a automotive spade fuse holder and using blade fuses. Works exactly like the spout.
 
J

JB66

New Member
Aug 21, 2004
565
1
0
New York
Dec 14, 2004
#3
  • Dec 14, 2004
  • #3
Pick one up at a salvage yard for a $.
 

Michael Yount

Mustang Master
Apr 10, 2002
9,039
6
79
Charlotte, NC
Dec 14, 2004
#4
  • Dec 14, 2004
  • #4
Just cut the two wires and put insulated male and female spade terminals on each wire. Plug it together = spout in; unplug it = spout out. If you really want to get fancy, extend the wires to the firewall or fenderwell and intall a toggle....
 

04sleeper

Founding Member
Jun 22, 2002
2,674
14
89
Dallas, TX
Dec 14, 2004
#5
  • Dec 14, 2004
  • #5
I might have an extra one laying around. I'll check tommorw for ya!
 

89MustangGX

I have nothing productive to add!
Jul 3, 2001
10,262
1
0
Mill Creek, WA
Dec 14, 2004
#6
  • Dec 14, 2004
  • #6
I'd also swing by a junkyard. They're used on numerous Fords for many years -- you're chances of finding one are pretty high.
 

yellowstang1994

New Member
Sep 9, 2004
338
0
0
Dec 14, 2004
#7
  • Dec 14, 2004
  • #7
I'll swing by some yards tomorrow. I been trying to diagnose my problem foreverrrrr and I found out the person who had the car before me didn't run with the spout connector in. So when I replaced my faulty stator and my whole distributor I could never get the timing right. Until now I found out I never had the spout in the first place, lol.
 
You must log in or register to reply here.

Similar threads

Does anyone know where to buy this
  • PvolkStang
  • Jul 19, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
285
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 20, 2025
manicmechanic007
Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
46
Views
2K
1965 - 1973 Classic Mustangs -General/Talk- Thursday at 9:44 PM
Noobz347
M
Progress Thread mnky99 2001 V6 evap core, ac compressor, heater core replacement
  • mnky99
  • Sep 5, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
493
1996 - 2004 SN95 Mustang -General/Talk- Sep 5, 2025
mnky99
M
E
Finished my Fox Hydroboost Install - Tips
  • Engineer Duane
  • Apr 9, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 5, 2025
Engineer Duane
E
D
Electrical a9p dead pin 33 & 46
  • deadpool89
  • Aug 31, 2022
  • Fox 5.0 Mustang Tech
Replies
4
Views
2K
Fox 5.0 Mustang Tech Sep 4, 2022
jrichker
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?