• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

doing some math or rocker arms ???

  • Thread starter Thread starter 2002BLGT
  • Start date Start date Dec 26, 2005
2

2002BLGT

Well-Known Member
Dec 18, 2003
2,945
4
59
Bedford VA
Dec 26, 2005
#1
  • Dec 26, 2005
  • #1
doing some math on rocker arms ???

can you run 1.7rr with Ecam or trickflow stage one ? with e cam you should be about .530 lift range on intake and exhaust ?? and with trickflow intake would be about .531 lift and exhaust would be .542 range ??? will either one have piston to valve clearance problems ????
 
D

DuffManRHA

New Member
Dec 23, 2005
15
0
0
San Marcos, CA
Dec 26, 2005
#2
  • Dec 26, 2005
  • #2
Kinda hard to say since we don't know the head gasket thickness, which heads, etc. Probably won't be a problem, but don't just look at max lift, since that will be when the piston is on its way down. The real concern is duration, which the E-cam has some pretty interesting valve events

Best way is to pull the head off and put some clay and put it through cycle and see if it clears. Contact Michael Yount on here, or search the Corral for similiar posts, he helped me out A LOT on my build when I did the E-cam

Eric
 

Michael Yount

Mustang Master
Apr 10, 2002
9,039
6
79
Charlotte, NC
Dec 26, 2005
#3
  • Dec 26, 2005
  • #3
The rocker ratio won't impact p to v much at all - but as DuffMan says, you need to measure.
 
2

2002BLGT

Well-Known Member
Dec 18, 2003
2,945
4
59
Bedford VA
Dec 28, 2005
#4
  • Dec 28, 2005
  • #4
well my friend has a E cam and he wants to put on 1.7s , his brother has a trickflow stage one cam ?? the question is should they both by 1.7s or one buy 1.7s and the other buy the 1.6s and they both swap and put 1.6s on the intake side and 1.7s in the exhaust side .....???
 

Michael Yount

Mustang Master
Apr 10, 2002
9,039
6
79
Charlotte, NC
Dec 28, 2005
#5
  • Dec 28, 2005
  • #5
And why would you be doing that?
 
2

2002BLGT

Well-Known Member
Dec 18, 2003
2,945
4
59
Bedford VA
Dec 28, 2005
#6
  • Dec 28, 2005
  • #6
Michael Yount said:
And why would you be doing that?
Click to expand...


because they are running GT40 cast iron heads and staggering the ratios is usually good for getting more lift and there for more flow to help out the exhaust side of the heads breathe better .....
 

bdazzgt

I had to jerk off the cable to get it to stop.
Dec 27, 2005
328
0
16
Springfield MO
Dec 28, 2005
#7
  • Dec 28, 2005
  • #7
That really only works on stock e-7's i wouldnt recommend it. It isnt worth the trouble to stagger them that is why we have dual pattern camshafts.
 

Michael Yount

Mustang Master
Apr 10, 2002
9,039
6
79
Charlotte, NC
Dec 28, 2005
#8
  • Dec 28, 2005
  • #8
The TFS cam is already exhaust biased both on duration and lift; Perhaps the E could use the help though.
 

Michael Yount

Mustang Master
Apr 10, 2002
9,039
6
79
Charlotte, NC
Dec 28, 2005
#9
  • Dec 28, 2005
  • #9
badazz - the intake flow bias on the GT40's is just as bad as it is on the E7's...
 

old_blue

15 Year Member
Nov 3, 2003
1,783
282
124
Dec 28, 2005
#10
  • Dec 28, 2005
  • #10
good info as I plan on running 1.72 RR with a trickflow stage one on ported e-7s
 

Michael Yount

Mustang Master
Apr 10, 2002
9,039
6
79
Charlotte, NC
Dec 28, 2005
#11
  • Dec 28, 2005
  • #11
blue - do you have flow numbers on the port job? Depending on how they flow, there may be better cam matches....
 

old_blue

15 Year Member
Nov 3, 2003
1,783
282
124
Dec 28, 2005
#12
  • Dec 28, 2005
  • #12
thumper stage 1 heads.
 

old_blue

15 Year Member
Nov 3, 2003
1,783
282
124
Dec 28, 2005
#13
  • Dec 28, 2005
  • #13
also plan on running a ported cobra/gt-40 intake (if I can find one for a decent price... anyone)
 

jammer84_03

New Member
Nov 30, 2003
468
1
0
Dec 28, 2005
#14
  • Dec 28, 2005
  • #14
check out my sig....got 1.7 stud mount with the e303...no probs
 

legalize420

Active Member
May 21, 2005
1,541
1
37
South Florida
Dec 28, 2005
#15
  • Dec 28, 2005
  • #15
jammer84_03 said:
check out my sig....got 1.7 stud mount with the e303...no probs
Click to expand...


:Word:
 
You must log in or register to reply here.

Similar threads

N
Looking for ECU/CHIP for 1992 5.0
  • Nathan26
  • Sep 26, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
9
Views
336
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 8, 2026
Qtrhrse23
A
Engine Genius installed oil filler above rocker arm…
  • afjLX
  • Mar 27, 2025
  • Fox 5.0 Mustang Tech
Replies
5
Views
669
Fox 5.0 Mustang Tech Mar 29, 2025
nicholase
Engine Looking for suggestions and or ideas
  • PonyGTrider
  • Aug 25, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
719
Fox 5.0 Mustang Tech Sep 7, 2026
PonyGTrider
F
Ford 460 swap
  • Ford460
  • Sep 13, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
6
Views
494
1996 - 2004 SN95 Mustang -General/Talk- Sep 14, 2026
Ford460
F
6
Hey all,I’m putting together a 302 for my 1968 Mustang and wanted to post the combo + some questions to make sure I’m not missing crucial
  • 68_Disgustang
  • Feb 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
5
Views
1K
1965 - 1973 Classic Mustangs -General/Talk- Oct 19, 2026
mattcrp1
M
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?