Door hinge pin replacement?

94-302-vert

Active Member

Aug 16, 2004

1,947

2

36

NE CT

Jun 16, 2005

#1

• Jun 16, 2005

• #1

I thought on the 94-95 we had to change the whole hinge not jsut the pins? I found this on the advance auto site:

http://www.partsamerica.com/ProductDetail.aspx?mfrcode=RNB&mfrpartnumber=38395&parttype=713&ptset=A

Anyone done this? is it worth the extra $$ to change the whole hinge vs the aggravation to do just pins?

Chris

 

DFG 5OH

Active Member

Aug 28, 2004

1,341

0

36

Louisville, KY

Jun 16, 2005

#2

• Jun 16, 2005

• #2

i put new pins in my car...its like new now

 

94-302-vert

Active Member

Aug 16, 2004

1,947

2

36

NE CT

Jun 16, 2005

#3

• Jun 16, 2005

• #3

how hard or I should say how long did it take you?

 

FastFord

Founding Member

Sep 5, 2002

380

0

0

Washington

Jun 16, 2005

#4

• Jun 16, 2005

• #4

Subscribing.

 

FastFord

Founding Member

Sep 5, 2002

380

0

0

Washington

Jun 16, 2005

#5

• Jun 16, 2005

• #5

94-302-vert said:

I thought on the 94-95 we had to change the whole hinge not jsut the pins? I found this on the advance auto site:

http://www.partsamerica.com/ProductDetail.aspx?mfrcode=RNB&mfrpartnumber=38395&parttype=713&ptset=A

Anyone done this? is it worth the extra $$ to change the whole hinge vs the aggravation to do just pins?

Chris

Click to expand...

In fact... what issue are you having with your hinges...? My drivers door pops.. Loud POP!.. when it gets cold enough. I always thought that the roller in the hinge needs replacing, and was going to replace the whole hinge this fall.

 

94-302-vert

Active Member

Aug 16, 2004

1,947

2

36

NE CT

Jun 16, 2005

#6

• Jun 16, 2005

• #6

my drivers door is sagging and I can get it to wiggle in the hinge. Occasionally it will pop when opeing and closing.

Chris

 

94-302-vert

Active Member

Aug 16, 2004

1,947

2

36

NE CT

Jun 17, 2005

#7

• Jun 17, 2005

• #7

Bump.

 

DFG 5OH

Active Member

Aug 28, 2004

1,341

0

36

Louisville, KY

Jun 17, 2005

#8

• Jun 17, 2005

• #8

its been a while since i dont this, but my door sagged too. Do you have a Haynes? I'm pretty sure i just followed that, but i knocked the pin out, and put a new one in while someone held the door up.

 

DougNuts

Founding Member

Jul 11, 2000

2,596

0

47

Georgetown Ky

Jun 17, 2005

#9

• Jun 17, 2005

• #9

I need to do this to my passenger side door. Where can we get just the pins?

 

1slow95

Founding Member

May 16, 2002

1,797

3

48

ohio

Jun 17, 2005

#10

• Jun 17, 2005

• #10

94-302-vert said:

I thought on the 94-95 we had to change the whole hinge not jsut the pins? I found this on the advance auto site:

http://www.partsamerica.com/ProductDetail.aspx?mfrcode=RNB&mfrpartnumber=38395&parttype=713&ptset=A

Anyone done this? is it worth the extra $$ to change the whole hinge vs the aggravation to do just pins?

Chris

Click to expand...

Those are for a fox mustang, they are different. I got them to work in mine, but it was a PITA and I had to remove the whole upper hinge assembly anyways. I couldn't figure out how to remove the lower....Sometime when I feel ambitious Im gonna replace the hinges the right way because my door still sags a little.