i go out to my car this morning try to get i and its froze shut. after foolin w/ it i get it open but it wont shut now. so i homey rig it and tie it shut. then someone parked me in and it snowed here all weekend so theres no chance in hell im getting out of the spot cuz all i was doing was spinning. i get ot of the car and out of disgust i slam the door.... not a good idea.... the window broke. i have a 79 capri. will all the mustang doors from 79-93 fit?
doors interchanbeable?
- Thread starter MY86GTVERT
- Start date
moonenn3186
Founding Member
YEs and no.
They will all physically bolt up, but a lot depends on the power of the doors.
Try to find someone who has the same power options. Some time the harnesses will not match up, or the door panels will not fit right. Get a dremel with a flex line attachment a number of little cutting wheels. Cut the door pins and get a buddy to help you remove the old door.
Then get the new door pins set from 5.0 resto and have two friends help you put the doors in (they are heavy and it takes a little time to get them to line up.)
THen put in your new bushings and pins.
THe doors might not line up properly. If this happens take off the fender wells and you can get a wrench in there to adjust them.
Hope this helps
They will all physically bolt up, but a lot depends on the power of the doors.
Try to find someone who has the same power options. Some time the harnesses will not match up, or the door panels will not fit right. Get a dremel with a flex line attachment a number of little cutting wheels. Cut the door pins and get a buddy to help you remove the old door.
Then get the new door pins set from 5.0 resto and have two friends help you put the doors in (they are heavy and it takes a little time to get them to line up.)
THen put in your new bushings and pins.
THe doors might not line up properly. If this happens take off the fender wells and you can get a wrench in there to adjust them.
Hope this helps
Similar threads
