• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Doors /trunk need aligned..

  • Thread starter Thread starter billison
  • Start date Start date Jan 9, 2013
Prev
  • 1
  • 2
First Prev 2 of 2

billison

I like tinted tail
15 Year Member
Feb 27, 2006
2,607
1,094
184
stl
Jan 11, 2013
#21
  • Jan 11, 2013
  • #21
As far as the hood, seems close, it's a aftermarket hood, the tag is faded but says narwood or harwood or something like that. It's dead on , on the passenger side but is a tad in on the drivers, as in the hood is a tad small.

I checked the door and it has pretty good play in it, so a bushing set is in its future.

I've not found anything that makes me think its been wrecked. ( could be wrong) but I think the car has been taken apart a few too many times.
 

mikestang63

SN Certified Technician
Aug 27, 2012
11,606
8,859
214
In the garage
Jan 11, 2013
#22
  • Jan 11, 2013
  • #22
check the crush zones under the hood by the front of the inner fenders to see if the car was hit, or new headlights, or front end hardware on the bumper or radiator support. 50% of the time you cant get an aftermarket hood to line up the same way as stock, due to these cars are 20 years old. Harwood is a good brand and well made. Most of the time you just line them up as best as you can and live with it.

You can get replacement bushings at autozone. they will work fine. I did a set a few years back. It's not hard. Just support the door and it helps to have a helper when you cut out the old pin so the holes line up. I saw a write up on how to do them a few years back in 5.0 or MMFF. Google and I bet you can find it.

Pretty sure the trunk sag is because you dont have the rubber bumpers. Easy fix.
 

billison

I like tinted tail
15 Year Member
Feb 27, 2006
2,607
1,094
184
stl
Jan 11, 2013
#23
  • Jan 11, 2013
  • #23
I'll look more tonight, but the only area that looked off was behind the battery. The battery is only held by a bungie so I assumed it was that, could of been a minor impact.
 

billison

I like tinted tail
15 Year Member
Feb 27, 2006
2,607
1,094
184
stl
Jan 11, 2013
#24
  • Jan 11, 2013
  • #24
Ok update!

I messed with the strikers. The passenger side is about dead on. I'm starting to think the door is off.. And possibly the fender too. I adjusted the striker and the top is good , the bottom is in and the front of the door is too far in, the fender is almost touching the cowl.. So something is off. I'll snap pics in a bit
 

mikestang63

SN Certified Technician
Aug 27, 2012
11,606
8,859
214
In the garage
Jan 11, 2013
#25
  • Jan 11, 2013
  • #25
look for new hardware, headlights, fender shims, fresh paint, overspray for signs of an accident. Also check the crush area behind the battery.
 

billison

I like tinted tail
15 Year Member
Feb 27, 2006
2,607
1,094
184
stl
Jan 11, 2013
#26
  • Jan 11, 2013
  • #26
I'll snap a pic in the morning, the area behind the battery is a bit banged up.
 

billison

I like tinted tail
15 Year Member
Feb 27, 2006
2,607
1,094
184
stl
Jan 11, 2013
#27
  • Jan 11, 2013
  • #27
It was repainted for sure, different hood, aftermarket headlights..
 

mikestang63

SN Certified Technician
Aug 27, 2012
11,606
8,859
214
In the garage
Jan 11, 2013
#28
  • Jan 11, 2013
  • #28
billison said:
It was repainted for sure, different hood, aftermarket headlights..
Click to expand...


Thats why I suggested looking for those items. That crush zone behind the battery is there to absorb the impact of a collision. If that is bent up bad, it was more than a 5pmh little fender bender and probably causing the misalignment of the fender.

Take a tape measure and measure for squareness under the hood from each corner in an X on the top of the fender where the hood bolts on. The measurements should be the same. I

You may want to crawl underneath and inspect the lower radiator support and the suspension for any signs of damage.
 

billison

I like tinted tail
15 Year Member
Feb 27, 2006
2,607
1,094
184
stl
Jan 11, 2013
#29
  • Jan 11, 2013
  • #29
I'll do that!
 

billison

I like tinted tail
15 Year Member
Feb 27, 2006
2,607
1,094
184
stl
Jan 11, 2013
#30
  • Jan 11, 2013
  • #30
ok! finally posting from a computer.

I took a tape measure and measured from the very corners of the engine bay, the bolts on both sides of the hood latch and the latch it's self each to the joint between the fenders and front bumper cover, unless I measured wrong, each measurement was either the same or so close I could'nt tell. Now the area behind the battery is banged up and the main thing I saw that looked off is the fender it's self, where it runs next to the cowl, it's been pushed in, I'll get several pics in the morning light.

what all should I look for under the front?

at this point I'm positive it's been in some kind of wreck and repaired..... but the car was almost free so I'm not gonna cry.
 

billison

I like tinted tail
15 Year Member
Feb 27, 2006
2,607
1,094
184
stl
Jan 12, 2013
#31
  • Jan 12, 2013
  • #31
Progress!

Passenger side seems about dead on now, I'll still play with the striker a tab bit after I get the window bushing in.

 

Attachments

  • B78A27A6-CB0C-4C09-8E57-227DB7F68984-2229-0000011824F3B6F9.webp
    83.7 KB · Views: 131

billison

I like tinted tail
15 Year Member
Feb 27, 2006
2,607
1,094
184
stl
Jan 12, 2013
#32
  • Jan 12, 2013
  • #32
Adjusted the trunk and installed the bumpers, still could use a little tweaking but it's better.

 

Attachments

  • 9CEAB2FE-4A30-4C42-834B-151059FD9D97-2229-0000011826E10DE4.webp
    28 KB · Views: 130

billison

I like tinted tail
15 Year Member
Feb 27, 2006
2,607
1,094
184
stl
Jan 12, 2013
#33
  • Jan 12, 2013
  • #33
And now the adjusted drivers door and what looks like damage. Crawled under it and everything looks fine.








 

Attachments

  • 877BCB81-EBD0-44E0-97B7-E942E93DB3C2-2229-0000011816A8F671.webp
    103.6 KB · Views: 130
  • 6A343083-9346-4348-930B-BB8CB17E9DC2-2229-0000011814C7998E.webp
    25.5 KB · Views: 150
  • E05A2D83-6465-4A51-83FF-DF4299F2EFDE-2229-0000011812B76EE5.webp
    64.7 KB · Views: 135
  • 8E5552A9-C099-4AF1-916D-3089261D927C-2229-000001181A99B343.webp
    91.8 KB · Views: 139
  • 44E34F6C-0CCB-4489-8604-0E9C67FEE133-2229-000001181CB6CFCD.webp
    114.1 KB · Views: 124
  • 5D8AEE6D-6ED8-452B-9749-0B7556815533-2229-000001182224AD05.webp
    103.2 KB · Views: 117

billison

I like tinted tail
15 Year Member
Feb 27, 2006
2,607
1,094
184
stl
Jan 12, 2013
#34
  • Jan 12, 2013
  • #34
Side note, I installed the drivers side window bushing and the window totally seals now minus needing to adjust the upward stop
 

mikestang63

SN Certified Technician
Aug 27, 2012
11,606
8,859
214
In the garage
Jan 12, 2013
#35
  • Jan 12, 2013
  • #35
Your car is white, the hood prop and bracket are white, the hood latch bracket is white but your radiator support as well as underneath the driver fender is sprayed a different color. Notice the shiny/missing rivets on the front bumper cover- that was off. Incorrect fender bolts, no shims. Somebody trimmed the front of both fenders under the hood. The Window washer reservoir missing See how the driver side fender is sticking out more than the front fender extension piece and the fenders look like they are too far out from the inner fender . Why is the battery so far away from the fender. Those fenders were def off at some point and it looks like they patched in a new radiator support.

.
 

billison

I like tinted tail
15 Year Member
Feb 27, 2006
2,607
1,094
184
stl
Jan 12, 2013
#36
  • Jan 12, 2013
  • #36
Took a look, the fender is shimmed up... Guess that's a trick of the trade.
 

billison

I like tinted tail
15 Year Member
Feb 27, 2006
2,607
1,094
184
stl
Jan 12, 2013
#37
  • Jan 12, 2013
  • #37
Missing the adjusters for the hood too.. In the front.
 

billison

I like tinted tail
15 Year Member
Feb 27, 2006
2,607
1,094
184
stl
Jan 14, 2013
#38
  • Jan 14, 2013
  • #38
Any idea what all is needed for the window washer? I found the resivor , I'm gonna assume everything under the fender is missing, so the resivor, hose and what does it mount to?
 
Prev
  • 1
  • 2
First Prev 2 of 2
You must log in or register to reply here.

Similar threads

Paint and Body Driver door alignment
  • elarm1
  • Mar 23, 2025
  • Fox 5.0 Mustang Tech
Replies
9
Views
456
Fox 5.0 Mustang Tech Mar 24, 2025
elarm1
P
Interior and Upholstery Door Speakers- found suggestion to go component, not coaxial
  • pindude80
  • Apr 21, 2025
  • Fox 5.0 Mustang Tech
Replies
13
Views
1K
Fox 5.0 Mustang Tech Apr 28, 2025
Mindseye007
T
1979 Inner Door beltline/dew wipe replacement part
  • toasterboy1
  • Sep 8, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
300
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 8, 2025
MinervaHBanta
M
Still need an Alignment?
  • from6to8
  • Jun 1, 2025
  • 1994 - 1995 Specific Tech
Replies
3
Views
277
1994 - 1995 Specific Tech Jun 2, 2025
AeroCoupe
J
Adjustment of driver front door
  • JJHstang
  • Feb 23, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
8
Views
419
1965 - 1973 Classic Mustangs -General/Talk- Mar 2, 2025
89ripper
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?