I have just recently installed a UPR K-member kit with A-arms and coilovers. I still have a completely stock rear. How much lower or higher does the front need to be in refrence to the back to still get good weight transfer? I'm worried about my 60's. Right now it's slightly lower in the front than stock, maybe a 1/4 of an inch..
I had hard time getting the ride height I wanted, and the springs seem stiff, and preloaded. I'm using a 14" 175lb spring. I already had a few 60's in the 1.6's and hope to at least be able to repeat that. That was with a stock suspension and 17" 315 MT DR's
I had hard time getting the ride height I wanted, and the springs seem stiff, and preloaded. I'm using a 14" 175lb spring. I already had a few 60's in the 1.6's and hope to at least be able to repeat that. That was with a stock suspension and 17" 315 MT DR's
