banks Member Mar 29, 2009 66 0 6 Mar 31, 2009 #1 Mar 31, 2009 #1 What is the best quality and easiest to install driveshaft loop for my 93 hatch?
90lxcoupe 20+ Year Stangneter Oct 7, 2003 3,596 350 134 Mar 31, 2009 #2 Mar 31, 2009 #2 I've got a competition engineering with the loop welded instead of bolted together. If you run an aluminum driveshaft the bolt heads can gouge the shaft and if its moving fast enough it can cut right into the driveshaft. http://www.picpile.net/ims/pic_266RN8aj/42889.jpg faststang90 10 Year Member Nov 5, 2007 522 16 49 baytown texas Mar 31, 2009 #3 Mar 31, 2009 #3 d s loop mine is bolted in to the car but welded together View attachment 264119 Cobra912 Active Member May 1, 2005 1,777 11 39 Wish I was anywhere but here Mar 31, 2009 #4 Mar 31, 2009 #4 this is what I bought, a Lakewood LAK- 18017 made for a 5.0 banks Member Mar 29, 2009 66 0 6 Mar 31, 2009 #5 Mar 31, 2009 #5 thanks guys, i'll check these out
I've got a competition engineering with the loop welded instead of bolted together. If you run an aluminum driveshaft the bolt heads can gouge the shaft and if its moving fast enough it can cut right into the driveshaft. http://www.picpile.net/ims/pic_266RN8aj/42889.jpg
faststang90 10 Year Member Nov 5, 2007 522 16 49 baytown texas Mar 31, 2009 #3 Mar 31, 2009 #3 d s loop mine is bolted in to the car but welded together View attachment 264119
Cobra912 Active Member May 1, 2005 1,777 11 39 Wish I was anywhere but here Mar 31, 2009 #4 Mar 31, 2009 #4 this is what I bought, a Lakewood LAK- 18017 made for a 5.0