Driveshaft length question/help!

R

red9535

New Member

Aug 4, 2007

5

0

0

Oct 17, 2007

#1

• Oct 17, 2007

• #1

My driveshaft is too short. My car is a 1995 Mustang, it had a 3.8 V6 with the AODE trans.. it now has a 5.0 with an AOD trans. The driveshaft is about 1.5-2" shorter then i'd like it to be - the yoke isn't gripping very much of the output shaft. What driveshaft do I need to be the proper length? One out of a fox body with the AOD, right?

 

BlownFiveLiter

have car, will race....wait, it doesn't run

15 Year Member

Nov 29, 1999

3,133

18

108

Chicagoland

Oct 17, 2007

#2

• Oct 17, 2007

• #2

One from a Fox may still be too short. Your best bet is to find one that's specific to our years.

 

R

red9535

New Member

Aug 4, 2007

5

0

0

Oct 17, 2007

#3

• Oct 17, 2007

• #3

Well, on our years, was the V6 shaft shorter then the V8 shaft? Because if not.. I HAVE the one thats specific to our years, and it's too short. I believe the output housing of the AODE that was in the SN95's is longer then that of the AOD.. so the stock one that i have on there right now is too short..

 

R

red9535

New Member

Aug 4, 2007

5

0

0

Oct 20, 2007

#4

• Oct 20, 2007

• #4

Nobody knows??